Abstract ——The 7th Member Congress of China Machine Tool Industry Association and the 7th Session of the Board of Directors successfully held the handover of the old and new leaders. On July 26, 2013, China Machine Tool Industry Association held the 7th Congress of Representatives in Beijing. And the seventh session of the council, meeting...
——The 7th member representative conference of China Machine Tool Industry Association and the 7th session of the council successfully held the handover of the old and new leaders
On July 26, 2013, China Machine Tool & Tool Industry Association held the 7th member representative conference and the 7th council in Beijing. The meeting successfully completed the established agendas and elected according to the charter and through strict democratic procedures. The new council and the standing council elected a new board of directors. Four rotating directors, including Wang Xu, Guan Xiyou, Zhang Zhigang and Long Xingyuan, were elected. According to the nomination of the rotating chairman, the board of directors voted to appoint the executive vice chairman Chen Huiren as the secretary general of the association. According to the regulations, the executive vice chairman is entrusted to be the legal representative of the association. He Guangyuan, Zhang Guobao, Liang Xunyu, Yu Chengting and Wu Bolin were appointed as honorary directors of the association. The meeting was chaired by Huang Zhao, the deputy chairman of the sixth council, Wu Bolin, executive vice chairman, and Wang Liming, executive vice president. Wang Xu, the newly elected chairman of the seventh council, made a concluding speech. The heads and representatives of more than 300 industry enterprises and institutions representing 1556 member units of China Machine Tool Industry Association, as well as the staff of the permanent establishments of the Machine Tool Association and the secretary-generals and representatives of the branch attended the meeting.
The meeting heard the macroeconomic report made by the Executive Vice President Wang Yiming of the Macroeconomic Research Institute of the National Development and Reform Commission; Mr. Wang Weiming, Deputy Director of the Equipment Industry Department of the Ministry of Industry and Information Technology, Zhang Tao, Deputy Director of the Association of State-owned Assets Industry Association, and Zhao Chi, Executive Vice President of the Machinery Industry Federation President’s report and speech. Vice President Wang Yiming analyzed the current macroeconomic situation and the challenges faced by the delegates, and proposed short-term countermeasures and medium-term adjustment strategies. It is pointed out that with the combination of internal and external environmental factors, China's economic growth will gradually slow down in the future, and the future development direction of enterprises will no longer be scale expansion, but efforts should be made to increase the added value of products. In his speech, Deputy Director Wang Weiming fully affirmed the work efficiency of the Machine Tool Association and the active cooperation with the government authorities, and hoped that the new leadership team of the Association will follow the pace of reform, innovate the working methods and contents, and continuously expand the Association. The space and depth of play.
On the basis of affirming the achievements of the Machine Tool Association over the years, Deputy Director Zhang Tao pointed out that the association should have a new position in the new situation. Emphasize that the association should highlight the leading role of the industry while doing relevant work; strengthen and coordinate industry norms; and vigorously strengthen its own construction. Vice President Zhao Chi spoke highly of the various forms of industry work carried out by the Machine Tool Association over the years. He believes that the Machine Tool Association has been recognized by the government departments, the trust of industry companies and the welcome of user units through unremitting efforts.
At the meeting, Wu Bolin, executive vice chairman of the sixth council, made a work report. The report describes the development of the industry over the past four years and the main work and effectiveness of the association, summed up the valuable experience and improvement direction, and put forward some suggestions for the work of the seventh council. Emphasize that in the critical period of industry development, the association should shoulder the historical responsibility, promote the transformation and upgrading of the industry; improve the level of service for members and users; deepen the research, reflect the demands, and strive for more policy support for the development of the industry; Be realistic and pragmatic, and do a good job of self-building.
The newly elected chairman of the seventh council, Wang Xu, executive vice chairman of Beijing Beiyi Machine Tool Co., Ltd. and Chen Huiren, respectively, made speeches. On behalf of the newly elected four directors, Wang Xu said that he is confident that on the basis of the better work laid down by the previous council, he will rely on and unite all member units to give full play to the role of the board of directors and permanent institutions and work hard to bring things to the association. We will do a good job in providing better services to our member units and make new contributions to promoting the transformation and upgrading of the industry and achieving sustainable development. Chen Huiren analyzed the new situation facing the industry and put forward the basic ideas, work priorities and efforts in the future development of the industry. Emphasize that industry associations should closely focus on the three functions of “providing services, reflecting demands, and standardizing behaviorsâ€, clarifying functional roles, identifying functional positions, and working hard to create industry development and association construction with new horizons, new ideas and new actions. The new situation.
The meeting heard and reviewed the amendments to the association's articles of association made by Mao Yufeng; listened to and reviewed the description of the association's membership fees and payment methods. The meeting also completed other matters.
1. Product introduction
Coal-based solvent recovery column Activated Carbon with high quality anthracite as raw material. By strict material selection and rigorous process, adopting the advanced technology and high temperature activation made. Its appearance is black columnar, the characters are tasteless, non-toxic, high mechanical strength, developed pore structure, large surface area, the pore size is between coconut shell activated carbon and wood activated carbon, high adsorption speed, high adsorption capacity, easy regeneration. It is a kind of durable environmental protection activated carbon.
2. Application
Solvent recovery column activated carbon is mainly used in printing and dyeing industry, and is mainly used for benzene, toluene, xylene, gasoline, alcohol, ether, chloroform, carbon tetrachloride, recovery of formaldehyde and other organic solvents; and the recovery of the hydrocarbons and steam, easy desorption, high wear resistance strength, long-term use is not broken, not pulverization. The product can reach recovered completely and standardized discharge effect.
3. Transportation and Packing
Woven bag, lined with plastic film bags, each 25kg can also be packaged according to customer demand. The product should be placed in a cool and dry place during storage; When transportation, it prevents to mixed with hard materials, to prevent carbon particles broken that affecting the quality of packaging, to prevent breakage. To avoid leakage or mixed with debris; to avoid water, oil and fire.
Column Solvent Recovery Activated Carbon
Column Solvent Recovery Activated Carbon,Activated Carbon For Solvent Recovery,Coal-Based Carbon For Solvent Recovery,Columnar Activated Carbon For Solvent Recovery
Ningxia XingKai Silicon Industry Co., Ltd. , http://www.xingkaisic.com
