More and more people are beginning to pay attention to warmth. When home heating is used for home renovations, there are several points of knowledge about floor heating.
Xinte plate
Plate selection: The heating effect is also closely related to the choice of floor heating products, especially the selection of geothermal floor materials. Ground heating has certain requirements for ground materials due to the particularity of its heating method. Therefore, floor heating must choose a dedicated floor. Plate related reference standards:
1. High density of substrate and good internal bonding strength. The base material is made of dense 100% arbor wood with a density of up to 0.95 g/cm2. It has good thermal stability and can guarantee long-term no cracking or deformation under high temperatures.
2. Thickness of water-absorption thickness The water-absorption thickness-expansion rate should be less than or equal to 2.5%, and it should meet the standard of national excellent products. The smaller the water absorption thickness expansion rate, the higher the moisture resistance of the floor.
3, Formaldehyde emission amount of formaldehyde should be selected as low as possible. Because the higher the temperature, the greater the amount of formaldehyde released, and the release of formaldehyde in the relatively closed residential room plus other items like large core boards, may exceed the standard, causing harm to the human body.
4. Heat transfer coefficient The heat transfer coefficient is also crucial. At present, there are heat transfer coefficient approvals provided by the Research Institute of Building Materials Experiments and international inspection agencies on the market, which can be inspected before purchase.
Expert advice:
1, floor heating to buy the use of the floor must be heat treatment, if you use the general floor, then the effect of heating will have a greater impact.
2. There are many different specifications for the floors that have undergone heat treatment in the market and are specially used for floor heating. The prices are also much different. As long as it is a floor that has been heat-treated, the requirements for floor heating are basically guaranteed. In fact, floors of 150 yuan/square and 400 yuan/square are almost the same in terms of heating effect.
3, when buying, there is no need to worry about the effect of heating and go to choose an expensive sheet, the difference in the price of various floors is mainly from the different materials and specifications.
Editor's note: Because of the special nature of floor heating, the requirements for the floor are very strict. Therefore, in addition to meeting the conventional quality indicators, the geothermal floor must meet the following three major requirements:
A, thermal conductivity and heat dissipation - thin and thick should not be thick Tips: wood and bamboo are very good natural materials, ground heat passed to the surface through the floor, there will inevitably be heat loss, the ideal floor can minimize these losses . Therefore, in order to reduce the loss of thermal energy and reduce the heating operation and maintenance expenses, the floor heating floor must be "thickness is not selected thick." Optional multi-layer solid wood, bamboo flooring and laminate flooring, the thickness of not more than 8 mm, the maximum can not exceed 10 mm.
B, high dimensional stability --- small should not be large Tips: the use of geothermal floor environment is quite complex, non-seasonal season ground to withstand all kinds of moisture, and heating the ground temperature suddenly rose, the wooden floor must withstand "temperature" Dual changes in "humidity". Therefore, geothermal flooring must be purchased with good stability, such as laminate flooring, multi-layer solid wood flooring, bamboo flooring, these integrated composite flooring.
C, moisture resistance and heat resistance is better --- suitable for environmental protection Tips: Integrated composite flooring adhesives, adhesives need to comply with environmental protection, bonding strength, high temperature and humidity resistance of the three major indicators. In particular, for geothermal floors, it is necessary to go through experiments such as high humidity resistance and low temperature resistance. If ordinary adhesives are used, environmental indicators, moisture resistance, aging resistance, and expansion rate cannot meet the standards. Therefore, when a consumer purchases, it is necessary to check the product report and inspection report of the merchant.
Panel purchase floor purchase nature floor heating formaldehyde interior decoration door price home decoration
DSPOF produce differnt of Fiber Optic Light,alos include the Sauna lighting kits.
The Fiber Optic Sauna Ceiling light are safe for use in wet and humid areas as no heat or electricity is present in the fibre optics or fittings, but the illuminator which contains the electricity, must be located outside the main sauna or steam room.
Sauna lighting is something of a specialist field. This is because the heat of the sauna will cause most traditional light sources to fail. To illuminate a sauna safely and effectively, one must either use a fibre-optic lighting system, or use specialist sauna LED's. Furthermore, getting the light levels and in turn the ambiance in the sauna right, is crucial to the enjoyment of the sauna itself.
Sauna Ceiling Light,Sauna Lighting Kits,Sauna Room Kit,Sauna Light Kit
Jiangxi Daishing POF Co.,Ltd , https://www.opticfibrelights.com