1, separate type (remote control and key separation) have two buttons, red and green, no need to program in the car
2, separate type (remote control and key separation) marked with two buttons LOCK and UNLOCK
(1) Unplug the buzzer (Fulica is behind the glove box)
(2) The whole door is closed, it is the ECU diagnosis port No. 1 terminal grounding, the ignition switch is OFF-ON-OFF, the central locking will automatically lock and open;
(3) Press the LOCK button for 1- to 3 times within ten seconds, the central control lock will automatically lock and open, and the setting is completed;
3, one-piece (key and remote control integrated) only one button
(1) Unplug the buzzer first, then unplug the receiver, close the door, connect the receiver plug, and wait for the working sound to be controlled;
(2) Pull the key out and pull out four times, then pull the middle hole of the left front door out and press it twice in two seconds, then the direction light will flash twice;
(3) Press the remote control's launch button for 1---4 times. At this time, the gate is unlocked and the direction light flashes once; (Other remote control must close the left door and repeat the (3) step programming, otherwise it cannot be used;
(4) Insert the key into the ignition switch, connect the buzzer plug, and the setting is completed;
4, one-piece (key and remote control integrated) with two buttons
(1) Connect the special tool to the host jack through a dedicated patch cord (new Delica is behind the throttle pedal);
(2) Clear password: Press the clear and learn button of the special tool at the same time;
(3) Chip password learning: turn the key to the ON position and press the learning button of the learning machine. At this time, the prompt sound can be heard and the setting is completed (if there are multiple remote controllers, this step must be repeated, otherwise it will be invalid); Control password setting: the key can't be on the ignition lock, press the learning button on the learning machine, and press any key on the key twice or more. At this time, the central control lock will act and the setting is completed (if there are multiple remote control keys to be repeated) This step, otherwise it will fail)
1. Set the remote control key when:
(1) The remote control key is added or replaced.
(2) The system is faulty.
2. Remote key setting procedure
(1) Take out all the remote control keys (up to 4 can be set).
(2) Turn the ignition switch ON and OFF 6 times within 10 s.
(3) The indicator will flash 2 times after 2s.
(4) The programming mode is activated for 2 minutes, and the following operations are performed: a. Press and hold the UNLOCK button. b. Press the LOCK button 3 times. c. Release the UNLOCK button. d. The indicator will flash once to confirm that the programming is correct.
(5) Repeat the above procedure to program the remaining remote keys.
(6) After programming the 4th key, the indicator flashes 3 times to confirm that the programming is correct.
(7) Turn the ignition switch to the ON position, the indicator light flashes 2 times (1~3 keys are programmed); the indicator light does not flash (4 keys are programmed).
(8) The programming mode is cleared.
(9) Check the operation of all programmed keys
We are a premium grow light manufacturer with 12 years of experience, with mature and rich product line, and a variety of lamps to choose from. OEM ODM also welcomed. We are committed to providing a complete and cost-effective led hydroponic lights solution that meets the needs of our customers. Our experienced professionals work diligently to ensure that our customers receive the best led grow light products and services available.
Spider Led Grow Lights,6500K Led Grow Light,Mars Led Grow Lights,Led Hydroponic Lights
GuangDong One World High-tech Co., Ltd. , https://www.maksdep.com