H type polyurethane cleaner
The first cleaning head first cleaning H-type alloy cleaner H-type polyurethane cleaner H-type rotating brush cleaner electric cleaner self-adjusting cleaner
H-type polyurethane cleaner overview: also known as the head polyurethane cleaner. The polymer self-adjusting type cleaner is installed at a position below the center line of the head roller.
Advantages of H-type polyurethane cleaner: The scraper is resistant to abrasion, corrosion and hydrolysis, and does not damage the belt and prolong the service life of the belt. The scraper material is polymer polyurethane, which has low friction coefficient, high wear resistance and high strength, and has stable scraping effect, anti-corrosion and anti-breaking without hurting the belt. It is suitable for conveyor belts of various industries such as electric power, metallurgy and mining. The service life is 3 to 4 times that of the alloy rubber cleaner. The H-type polymer polyurethane cleaner is suitable for cleaning the material adhering to the belt at the unloading roller, and the two-way cutter head and the one-way cutter head belong to the head lane cleaner.
H type polyurethane cleaner structure features:
ü Integrated design, easy to install and adjust, and strong applicability;
üThe tape will not be deflected during the cleaning process;
ü Safe and reliable, long service life and low maintenance cost;
ü When the cleaner is working, the cleaning point is in continuous contact, the cleaning is powerful, and the cleaning effect is good;
ü Passive cleaners do not require a power supply, practical and energy efficient;
ü The scraper is processed by special process, non-sticky and non-fouling;
ü No wear on the tape to extend the life of the tape.
Contact: Wang Le
phone number
Landline
fax
mailbox:
Shandong Ouke Drilling and Mining Machinery Co., Ltd. http://okeshebei003.b2b.hc360.com
Jining Ouke Mining Equipment Co., Ltd. http://okeshebei003.cn.makepolo.com/
My company's main business: all kinds of cleaning machine shotcrete machine and accessories button machine and belt buckle, belt conveyor integrated protection device and vibrator
Forstner bits, flat-bottomed to drill holes in wood materials, they can cut on the edge of a block of wood, and can cut overlapping holes; for such applications they are normally used in drill presses or lathes rather than in hand-held electric drills. Because of the flat bottom of the hole, they are useful for drilling through veneer already glued to add an inlay.
The bit includes a center point which guides it throughout the cut (and incidentally spoils the otherwise flat bottom of the hole). The cylindrical cutter around the perimeter shears the wood fibers at the edge of the bore, and also helps guide the bit into the material more precisely.
Forstner bits have radial cutting edges to plane off the material at the bottom of the hole. The bits shown in the images have two radial edges; other designs may have more. Forstner bits have no mechanism to clear chips from the hole, and therefore must be pulled out periodically.
Forstner Bits,bosch forstner bits,colt forstner bits
Behappy Crafts (suzhou)Co.,Ltd , https://www.jshaoyue.com