Sunken type soda mixer
The most significant feature of the immersed soda mixer is that the heating is stable, silent, and vibration-free. To avoid the noise, vibration, and heating instability when the heater is used, what should be noted when installing the device?
First, the immersed soda mixer means that the soda mixer must sink in the water, it should be installed in the middle of the container; 2 ensure that the water submerges the mixer more than 100mm, about 200mm from the bottom; 3 the steam pipe introduced into the container should be fixed There should be no loose phenomenon; 4 The check valve is installed on the steam pipe near the water source to prevent the water from flowing back into the steam area and impact the pipe system to generate vibration. When more than one parallel use, it should be evenly arranged.
From the working principle of the submerged soda mixer, steam is sprayed into the shell from the nozzle at high speed, which has a strong ejecting effect on the surrounding cold water. The cold water enters the steam mixer through the inclined hole on the outer wall and high-speed heat exchange with steam ; Perform full heat exchange. The size of the inclined hole affects a heat exchange surface of steam and water. When using it, it must be ensured that the inclined hole does not clog. Therefore, it is necessary to ensure that no impurities in the pipe are brought into the soda mixer, and installing the filter is a good choice. The chance of noise during operation of the heater is very small, usually the steam pressure is too high, so that the steam and water are not mixed heat exchange between the heater core and the housing, but outside the heater, so only need to be adjustable Steam pressure valve, adjust the steam pressure on the line.
Single layer roof Roll Forming Machine
Single Layer Roof Roll Forming Machine is composed of feeding, molding and shaping up after cutting machines, color plate and its appearance tidy and beautiful, uniform lacquer veins, high strength, durable, widely used in industrial and civil buildings, such as factories, warehouses, stadiums, exhibition halls, theaters room and wall surface.
Components of single layer roof roll forming machine:
Manual Uncoiler , Guiding Platform, Main Machine Of Roll Forming,Cutting Device, Hydraulic Station, PLC Control, Supporter Table.
The processing technique and deployment of single layer roof roll forming machine:
Man-made uncoiler-Roll forming machine-PLC system-Hydraulic system-Post cut
Description of single layer roof roll forming machine:
Thickness of material: 0.2-0.8mm
Main structure:300H steel
Wall plate: 14mm
Diameter of shaft: Ф70 solid
Chain: P=19.05
Bear: 6210
Electric motor power: 3KW
Reducer: 4# cycloid reducer
Roller: 11rows
Forming speed: 8-12m/min
Material of Rollers: Carbon Structural Steel Hard chromium Plating on the surface
Cutting type: Hydraulic shearing
Motor: 380V, 50HZ/3 phase
Electrical part:CHINT,Delixi
Hydraulic motor: 3KW
Tail cutting material: Delta PLC-14ES
Size of machine: 5.8m*1.4m*1.2m
Delivery: 30 days after receipt of advance payment
Package: Plastic packing and nude in the container
Payment Term: T/T, L/C, Trade assurance
Warranty: 12 months limited warranty
FAQ:
1. Q: Are you a manufacturer?
A:Yes, we are manufacture with roll forming machine factory.
2. Q: What details of the machine you should get from me.
A: I will confirm all details with you, such as the voltage in your city.
3. Can you use other brand of spare parts for me if i want?
A: No problem if you want to pay the money.
Single Layer Roof Roll Forming Machine
Single Layer Roof Roll Forming Machine,Single Layer Roofing Sheet Machine,Galvanized Roof Roll Forming Machine,Steel Single Layer Roof Roll Forming Machine
Shijiazhuang Zhouming Steel Building Materials Co., Ltd. , https://www.zmsteels.com