KCB gear pump introduction

KCB gear pump with safety valve as overload protection, safety valve full back pressure of the pump rated exclusion pressure of 1.5 times, but also allows the discharge pressure within the scope of the actual need to be adjusted. But note that the safety valve can not be used for long-term work of the valve, if necessary, can be installed separately in the pipeline. KCB gear pump mainly gear, shaft, pump, safety valve, shaft seal composed of the end. KCB gear oil pump gear heat treatment has a higher hardness and strength, KCB gear pump with the shaft installed in the interchangeable sleeve operation. The lubrication of all parts in the pump is automatically achieved using the output medium while the pump is in operation. The pump has a well-designed drain and return tank, the gear torque in the work to bear the smallest, so the bearing load, wear a small, high pump efficiency.

British Standard Hose Fittings and connectors are available in two versions, a parallel thread (BSPP, also known as "G") and a taper thread (BSPT, also known as "R"). The BSPP fitting is similar to National Pipe Straight Mechanical (NPSM), except the the thread pitches are different in most sizes. The BSPP female swivel has a tapered nose/Globeseal flareless swivel which seals on the cone seat of the male. While many users mistakenly identify BSPP fittings as metric, these fittings are actually measured in inches                                                                    

Inculde:                                                                                                    

BSP is British standard Hydraulic Fitting

BSPT is British standard Taper Hose Fitting
BSPP is British standard  Parallel Hydraulic tube Fitting

British Hydraulic Fitting

British Hydraulic Fittings,Hydraulic Connectors,Hydraulic Coupling ,Barbed Hose Fittings

SHIJIAZHUANG TOPA TRADING CO., LTD. , http://www.topahydraulic.com