Children's room lighting should be selected soft warm light, my space, I call the shots - green environmental protection has long become the consumer most concerned about the issue of home decoration, and families with children or children will be more concerned about. Experienced designers tell us: The healthy children's room contains thoughtful design on both material and spiritual levels. The most important thing for parents to pay attention to is that children should be allowed to participate in the decoration design. Children have a large amount of information and many ideas. Participating in the design will benefit children's development of their thinking ability. At the same time, parents should focus on the safety and environmental protection of materials selection and decoration. Furniture: Do not do a lot of furniture fixed to the wall, especially the panel furniture, because the panel furniture will use large core boards, particle board, etc., the formaldehyde content of these substrates is high, not environmentally friendly, the impact on children's health Great. Children's furniture should be based on logs and soft materials. It is best to use solid wood panels rather than furniture made of plywood. It is best not to paint, but polished wood furniture. Painted furniture should be used with caution, and darker furniture should not be chosen because the heavier the color, the higher the lead content. Small children may bite and scratch furniture. These materials affect the child's health and are not easily repaired after damage. Wall: It is not advisable to put a wallpaper on it so that there is no space for children's graffiti. The designer suggests that a board made of cork or white pine should be specially designed for the children to paint and graffiti on the wall. If the wallpaper is full, the entire space will become airtight and depressing. Children's walls are best painted, to choose a brand better water-based paint, not only allows children to paint freely, but also easy to scrub safety and environmental protection, the child's thinking ability is very active, so do not limit them, not to fear chaos. Luminous wallpapers and coatings can be used locally, but because they contain substances such as phosphors that are harmful to the human body, they must be carefully selected. Ground: Children's room carpet can not be full, because the carpet is easy to breed maggots, accumulation of powder ash, will affect the child's respiratory tract, it is recommended to choose stone plastic floor or colorless wood flooring and other soft materials flooring, especially stone plastic The floor is more environmentally friendly and it is also very easy to clean. The floor is best not to choose dark floor tiles or stone. The floor of this material is hard and cool, and it is easy to slip and injure children. Covert projects: switch sockets, network cables, telephone lines, etc. must be done for future use. Because the children's electric toys will be more, so the children's room socket to do 5-6, it is best to put one in each corner of the room, not too conspicuous, and must have a protective cover to prevent children because of curiosity Electric shock. In addition, children's rooms must be protected against electrical leakage. Lights: When the children were young, they often lived with their parents. They were scared when they began to live alone. Therefore, the light must be soft, and the light should be warm and naturally comfortable. Do not use big, pale lights. As the child grows, there will be a need for reading, so the light and darkness of the bedside can best be adjusted, and the switch is best placed near the bedside table where children can reach. Beds and windows: The bed is against the wall. It is relatively safe to prevent children from falling in their sleep. Second, they can leave enough room for activities. There must be a blanket on the side of the bed so that the child can get up late, run barefoot, or prevent bumps. Do not hang a fixed ornament on the child's bed, especially infants, and it is easy to affect the child's eyes. If you choose a slide bed, be sure to leave a certain space around the slide bed. There should be a buffer area in front of the slide to prevent the children from hitting the wall when they slide down. The handrails on both sides should not be too low. The bedding around the bed should be strong, and the height should be higher. It is not advisable to choose a setting such as a small hole that can easily injure a child's fingers or limbs. If the space permits, a platform 10-20 cm above the ground can be set around the bed in the position of the window. The position of the bed can be used as a soft bag. This will increase the space for children's activities and provide a large degree of freedom. It is convenient for children to play with children. The position of the windows should be protected. In particular, floor-to-ceiling windows, low windows, and bay windows must have guard rails. The stone window sills should be padded. Furnishing: The choice of furniture should avoid sharp corners, so as to avoid children being bumped, children are active, higher furniture such as wardrobe or bookcase, it is best to fix the back board on the wall, especially the bookcase is relatively thin, focus on comparison Small, there are laminates, the child may climb up, after the fixed bookcase can be avoided to fall, so the best choice for bookcases selected bookcases and desks conjoined, the support point is relatively stable, the feet can kick the place can not have glass . Placement of furniture to think about the future re-set and change the pattern, the furniture is best multi-functional, can be combined, not fixed, placement can be done to increase the freshness. The late layout of the children's room is very important, hard decoration as little as possible, can be changed as the child's age, you can change the decoration and change the overall feeling of the room. After the wallpaper is full, it is not easy to change later. Tip: Avoid using black tone in children's rooms. There should be no beams on the roof, if it must be lifted to reduce pressure. The bed should not be placed in a place that can be seen when you open the door to ensure that your child's privacy increases your sense of security. Safety Bathrobes: Soft and Injury-Free Skin Some towels and bathrobes become rough and stiff after being washed several times, which is detrimental to the child's skin. ABYSS & HABIDECOR, the world's top towel, bath robe, and floor mat, can gently care for the baby. It uses Egyptian combed long-staple cotton and is tested by an authoritative organization and can directly contact the baby's skin.
Space effect picture Children's room furniture window space bedside wallpaper children bed black floor children's slide bed children's floor mat children's desk glass furniture glass door furniture children's bookcase glass brick baby bed floor tile children's wardrobe glass table slide bed
Planar beam loadcells, also known as planar force sensors, are used in low profile solutions where space is limited. These loadcells can be used as single or multiple loadcell structured platform scales.
Applications with planar beam loadcells
Most of the applications using planar beams are suited with 3 or 4 pieces for each application. which are used for point-of- sale scales/weighing systems in the 10 to 400 pound range. The low profile weighing equipment can be found in many different applications like medical applications (hospital bed and chairs, baby scales, incubators), checkout counters, agricultural devices, retail scales, bench scales and many other weighing devices.
Planar Beam Load Cells,Planar Beam Load Cell,Planar Force Sensors,Multiple Load Cell
Zhejiang Nanhua Electronic Technology Co., Ltd , https://www.nhloadcell.com