Solenoid valve failure will have a direct impact on the switching valve and regulating valve action, the common fault solenoid valve does not act, should be checked from the following aspects: (1) Solenoid valve loose or thread head off, the solenoid valve can not be tight, tight Thread fixed head. (2) Solenoid coil burned out, remove the solenoid valve wiring, with a multimeter to measure, if the open circuit, the solenoid valve coil burned out. The reason is the coil damp, resulting in poor insulation and leakage flux, causing the coil current is too large and burned, so to prevent rain into the solenoid valve. In addition, the spring is too strong, the reaction force is too large, the number of coil turns is too small, and the suction is insufficient, the coil can also be burned. In emergency, the manual button on the coil can be turned to "1" position by the "0" bit during normal operation, so that the valve is opened. (3) solenoid valve stuck. Solenoid valve sleeve and valve spool with a very small gap (less than 0.008mm), are generally a single assembly, when mechanical impurities into or too little oil, it is easy to get stuck. Approach can be used steel wire from the hole into the head, make it bounce. The fundamental solution is to remove the solenoid valve, remove the valve plug and spool sleeve, with CCI4 cleaning, making the spool movement in the valve sleeve flexibility. Disassembly should pay attention to the assembly sequence and the location of external wiring in order to reassemble and wiring properly, but also check the oil mist hole is blocked, the lubricating oil is sufficient. (4) leaks. Leakage will result in insufficient air pressure, making it difficult to open and close the forced valve due to damaged gaskets or slide valve wear caused by several cavity blow-by gas. In dealing with switching system solenoid valve failure, should choose the appropriate time, and so on when the solenoid valve is in power loss processing, if not within a switching gap processing, the switching system can be suspended, calmly deal with.
LED Spike Light
We are engaged in medium and high-end LED decorative lighting with a whole set of design and manufacture of lamps and lanterns, development of control system and engineering supporting service. Our company is devoted to provide customers with LED application products, which is energy-saving with high efficiency, stable of quality and innovative technologically. We wholeheartedly develop a world's most competitive enterprise with professionally high quality LED lighting and contribute to energy saving and emission reduction of humanity and the great cause of increase in green earth! Our LED series products can be used extensively in different lighting occasion such as bridge building elevation profile, light-projection, floodlighting, roadway lighting, tunnel lighting, square lighting, waterscape lighting, supplementary lighting for monitoring facility, vegetative lighting, household lighting, commercial lighting, leisure entertainment spots, outdoor advertising; we will market more and better new LED lighting products with higher efficiency and energy conservation in the future. Synno has got through ISO9001 quality system certification of SGS of Switzerland, CE certification of European Union, GS certification, ROHS certification and relevant domestic LED lamps and lanterns certification; we have brought our competitive products with reliable performance to every corner of the world, at present 60% of our products have exported to about 30 countries and regions. With the concept of quality first, credit first, service first, we sincerely wish to have the chance to build friendly strategic partnership with wide customers and friends. Synno expects to make acquaintance with you, know you and create a beautiful future with both efforts!
Led Spike Light,Led Spike Garden Lights,Outdoor Led Spike Light,Led Garden Spike Lights,Led Spike Spot Light
Jiangmen Synno Lighting Co., Ltd. , https://www.synnoled.com