Wall clothing is a kind of water-based environmental protection product that will not dry out in 24-48 hours. Therefore, in order to prevent some of the walls with low construction quality from facing the outside and penetrating the stains, the newly created walls are generally flat and dry and need to be covered with putty and sealed with white water-based primer, unpainted wood or metal surfaces. Must be painted white water-based primer to seal. The following Xiaobian introduces the construction method of wall clothing and the characteristics of wall clothing.
Wall coat construction method
I. Preparation
1. First, pour the product inside the package into a hurried plastic container.
2, according to the instructions on the packaging bag, add warm water (water temperature is generally controlled at 20 °C -40 °C is appropriate), and then stir evenly.
3. Use clean tap water to avoid contamination.
4. Put it into use after stirring for about one hour. If it is used in advance, it will reduce the bond strength of the product and the fluidity of the construction. Stir thoroughly when starting to use to ensure even mixing and no agglomeration
Third, roller coating
1. Stick the mixture plastic spatula to the wall, wipe it off, and use a special roller brush roller (the thickness is usually 1-2 mm). After drying, it was found that there were uneven or bare walls, sprinkled with warm water, and then a good product was added. Rolling was sufficient.
2. When roller coating is applied for the last time, the roller brush must be in the same direction. The five-rule roller coating will make the product's proper texture look even more messy, and it will produce a visual effect that the overall color of the wall surface is uneven.
3. Finally, for which wall's inside and outside corners, the plastic scraper used for scraping the putty can be used for shaping, and then the roller brush can be applied to the roller again.
Wall clothing features
1, no cracking, no shedding
With good flexibility and good air permeability, the wall surface can be integrated.
2, convenient construction without pollution
The method is simple, one-time molding, does not require re-grinding, can effectively avoid dust, noise and spills.
3, repair simple
Repair is simple, can be integrated with the original wall clothing, no convergence gap, no trace of repair.
4, easy to update
As long as the wall surface is clean, smooth, and the bottom surface is white, with good water resistance, the construction of the wall clothing can be carried out directly, and it can be refurbished without any special treatment.
5, natural sound-absorbing
The dry wall clothing, uneven three-dimensional relief surface, is conducive to sound diffusion, weakening the penetrating power outside the wall, can well limit the sound reflection, no echo, providing people with a more quiet life and work environment.
Editor's summary: The wall coat construction method and the characteristics of the wall clothing are introduced here. I hope to help everyone. If you want to know more about yourself, you can follow the information on this site.
Wall wardrobe wall clothing construction method
Grow Light For Indoor Plants 220w
Grow Light For Indoor Plants 220w, quantum board Plant Lamp 220w with 2 board, each board 350pcs led, include 3500k white+660nm red+UV+IR, samsung LM301B/LM301H quantum board with meanwell driver, meanwell driver we provide 5 yrs warranty time, normal driver 1 yr warranty.
Application:Grow Tent , indoor plants, hydroponic etc.
Best Lights For Indoor Growing,Led Grow Lights For Indoor Plants,Indoor Garden Light,Best Led Grow Lights For Indoor Plants
Shenzhen Wenyi Lighting Technology Co., Ltd , https://www.wygrows.com