Door and window glass, is related to personal safety, when the collection of the housing must remember to accept the doors and windows, Xiao Bian specifically summed up a few doors and windows acceptance of common sense, feel useful owners, you can collect Ha! 
First, the door and window deformation door and window deformation problem is more common in the inspection room. Such as the window frame is hit concave, door frame is broken, the door has a scratch, etc., these are workers carelessness in the installation process, or the installation did not pay attention to the protection of finished products. These problems affect aesthetics from a minor point of view, and they can cause doors and windows to close, resulting in safety hazards.
Xiao Bian reminds that even minor deformations of doors and windows should be promptly repaired. Otherwise, as time goes on, the deformation will increase. This will not only affect the appearance, but also the use of doors and windows.
Second, the bottom frame of the door and the door without drain The Other outstanding design flaw is that the bottom frame of the door and the window is not provided with a drain outlet. This problem has appeared in many real estates. If it is not found and rectified in time, rain will seep into the bottom frame of doors and windows when it rains, and it will not be discharged in time. This will cause water to corrode doors and windows and shorten the service life of doors and windows. Xiao Bian reminds: If the owner does not check during the inspection, this installation problem will be left to the owner, and other problems will be found after the renovation, then who to look for? So the owner in the inspection of the house should be carefully checked every site , Found problems should promptly require developers to rectify.
Third, the door and window frame and the wall between the leakage of sealant In accordance with the "construction and decoration project quality acceptance norms", the gap between the metal door and window frame and the wall should be filled full, and sealed with sealant. However, home inspectors found that many real estate doors and windows leaked sealant, or sealant is not complete. This not only affects the airtightness of the doors and windows, but also on rainy days, rain can easily seep into the room and damage the interior decoration.
Xiao Bian reminds: This type of problem is often overlooked by the owner when he/she is collecting the room, and only after the renovation has been checked and found that the trouble is too great. The developer must be required to re-fill the sealant.
Fourth, the size of the doors and windows is not up to standard specifications design is unreasonable, later is often difficult to rectify, it will also bring inconvenience to the owners of future life. For example, the design of doors and windows has strict requirements in the specification, but in the process of inspecting the house, it was found that some of the doors and windows of the properties were not designed as required, leaving problems for the owner's later decoration or life. For example, the doorway of the new house is too narrow and its width is only 76 centimeters. It does not meet the requirement of the “Residential Design Code†that the minimum width of the door opening is 90 cm. Xiao Bian reminded: When the property owner checks the house, bring a tape measure to measure the door opening and the window size at any time. If there is any problem with the design, the developer should find a remedial measure in time.
5. There are special construction requirements for some parts of windows and doors with no drip line . It must be constructed in accordance with regulations. For example, on the outer edge of the window, a drip line is required to prevent rainwater from flowing into the window sill or the interior wall. However, in the process of inspecting the house, it was found that multiple real estates did not do a drip line as required, leading to the occurrence of water infiltration. If it is not rectified in time, the rain will still follow the window in the rainy days in the future, and it will be inevitable that the walls will be damp and moldy and long-haired.
Xiao Bian reminded that the leakage problem has a great impact on housing decoration and future life. Doors and windows are also one of the sources of housing leakage. The owner must carefully check the collection of houses and avoid potential leaks.
6. There is no safety glass installed on the lower frame of the window sash. For safety reasons, there are also rigid rules for the installation of window glass. According to the “Regulations for the Management of Building Safety Glassâ€, safety glass must be used for glass with a glass bottom less than 50 cm away from the final decoration. Nowadays, many units are designed with a bay window, but it is difficult to find the 3C logo under the bay window to fix the fan glass. It is not a safety glass and there are safety hazards. Xiao Bian reminded: Door and window glass is a matter of personal safety. If the owner does not see the 3C logo at the bottom of the bay window, he must ask the developer to show the certificate or the material to the factory inspection book. If he cannot prove to be a safety glass, he must replace it. .
The above common knowledge about door and window acceptance, we have not mastered it? If you want to understand other aspects of decoration knowledge, you can visit the official website of this site, a large number of professional decoration knowledge, look forward to your discovery!
First, the door and window deformation door and window deformation problem is more common in the inspection room. Such as the window frame is hit concave, door frame is broken, the door has a scratch, etc., these are workers carelessness in the installation process, or the installation did not pay attention to the protection of finished products. These problems affect aesthetics from a minor point of view, and they can cause doors and windows to close, resulting in safety hazards. Xiao Bian reminds that even minor deformations of doors and windows should be promptly repaired. Otherwise, as time goes on, the deformation will increase. This will not only affect the appearance, but also the use of doors and windows.
Second, the bottom frame of the door and the door without drain The Other outstanding design flaw is that the bottom frame of the door and the window is not provided with a drain outlet. This problem has appeared in many real estates. If it is not found and rectified in time, rain will seep into the bottom frame of doors and windows when it rains, and it will not be discharged in time. This will cause water to corrode doors and windows and shorten the service life of doors and windows. Xiao Bian reminds: If the owner does not check during the inspection, this installation problem will be left to the owner, and other problems will be found after the renovation, then who to look for? So the owner in the inspection of the house should be carefully checked every site , Found problems should promptly require developers to rectify. Third, the door and window frame and the wall between the leakage of sealant In accordance with the "construction and decoration project quality acceptance norms", the gap between the metal door and window frame and the wall should be filled full, and sealed with sealant. However, home inspectors found that many real estate doors and windows leaked sealant, or sealant is not complete. This not only affects the airtightness of the doors and windows, but also on rainy days, rain can easily seep into the room and damage the interior decoration. Xiao Bian reminds: This type of problem is often overlooked by the owner when he/she is collecting the room, and only after the renovation has been checked and found that the trouble is too great. The developer must be required to re-fill the sealant.
Fourth, the size of the doors and windows is not up to standard specifications design is unreasonable, later is often difficult to rectify, it will also bring inconvenience to the owners of future life. For example, the design of doors and windows has strict requirements in the specification, but in the process of inspecting the house, it was found that some of the doors and windows of the properties were not designed as required, leaving problems for the owner's later decoration or life. For example, the doorway of the new house is too narrow and its width is only 76 centimeters. It does not meet the requirement of the “Residential Design Code†that the minimum width of the door opening is 90 cm. Xiao Bian reminded: When the property owner checks the house, bring a tape measure to measure the door opening and the window size at any time. If there is any problem with the design, the developer should find a remedial measure in time. 5. There are special construction requirements for some parts of windows and doors with no drip line . It must be constructed in accordance with regulations. For example, on the outer edge of the window, a drip line is required to prevent rainwater from flowing into the window sill or the interior wall. However, in the process of inspecting the house, it was found that multiple real estates did not do a drip line as required, leading to the occurrence of water infiltration. If it is not rectified in time, the rain will still follow the window in the rainy days in the future, and it will be inevitable that the walls will be damp and moldy and long-haired. Xiao Bian reminded that the leakage problem has a great impact on housing decoration and future life. Doors and windows are also one of the sources of housing leakage. The owner must carefully check the collection of houses and avoid potential leaks.
6. There is no safety glass installed on the lower frame of the window sash. For safety reasons, there are also rigid rules for the installation of window glass. According to the “Regulations for the Management of Building Safety Glassâ€, safety glass must be used for glass with a glass bottom less than 50 cm away from the final decoration. Nowadays, many units are designed with a bay window, but it is difficult to find the 3C logo under the bay window to fix the fan glass. It is not a safety glass and there are safety hazards. Xiao Bian reminded: Door and window glass is a matter of personal safety. If the owner does not see the 3C logo at the bottom of the bay window, he must ask the developer to show the certificate or the material to the factory inspection book. If he cannot prove to be a safety glass, he must replace it. . The above common knowledge about door and window acceptance, we have not mastered it? If you want to understand other aspects of decoration knowledge, you can visit the official website of this site, a large number of professional decoration knowledge, look forward to your discovery!
Door and window doors and windows acceptance
Ningbo Kyson Cool Electronic Technology Co., Ltd. , https://www.kysonrefrigeration.com