API 5CT P110 Oil&Gas Seamless Casing Steel Pipe Bc/LC

 
Standard:
API 5CT 
Grade:
J55 N80 P110
Thickness:
2.87 - 16.13 mm
Section Shape:
Round
Outer Diameter:26.7
 - 114.3mm
Place of Origin:
China (Mainland)
Secondary Or Not:
Non-secondary
Application:
Oil Pipe
Technique:Cold Drawn/
Hot Rolled
Certification:
API
Surface Treatment:
Black,varnish
Special Pipe:
API Pipe
Alloy Or Not:
Is Alloy and Carbon Steel
Material:
34CrMo4,H40,J55, K55, N80,L80,M65,C90,T95,P110,Q125
Product name:
API-5CT Seamless Tubing

Packaging & Delivery
Packaging Details:
Seaworthy, Steel Shelf, Iron Pallet or as per customer's requirement
Delivery Detail:
20-55 days
API-5CT Seamless Tubing
Product Description
 Casing and tubing for Sour Oil and Gas Service must have a good anti-SSCC (sulfide stress corrosion and cracking) performance in the environment where hydrogen sulfide corrosion exists. After an indepth study, we has successfully developed tubular goods of the Cr-Mo series for this purpose with good hardenability and tempering stability that when tempering takes places at certain temperatures uniform and fine sorbite structures can be obtained. Their mechanical properties can meet fully the requirements of corresponding grades and their anti-SSC performance is excellent by regulating the chemical composition and adopting different heat treatment procedures
Characteristics:
1. Materials: The chemical compositions have been carefully determined to provide resistance to sulfide stress corrosion as well as to insure complete through wall hardening.
 
2.Heat Treatment: Quenching and Tempering are conducted under rigid temperature control to assure homogeneous physical properties and microstructures.
 
3.Micro Structure: These grades exhibit fully tempered martensite which is considered to be the most desirable for resistance to sulfide stress corrosion cracking.
 
4. Tensile Properties and Hardness: Yield Strength is limited within a narrow range and hardness is controlled to within the predetermined maximum limit.

5. Sulfide Stress Cracking (SSC) Performance: Whole grades are designed for 85% or 90% SMYS in NACE condition. Excellent SSC resistance has been achieved through rigorous, chemical composition, heat treatment, microstructure, tensile properties, hardness and so on.
 
Pipe inspection:
A full length non destructive inspection is performed in accordance with API 5CT for external and internal, longitudinal and transverse defects with a standard notch depth equal to 5% of the specified wall thickness.
   
Standard:
API 5CT 
Grade:
J55 N80 P110
Thickness:
2.87 - 16.13 mm
Section Shape:
Round
Outer Diameter:26.7
 - 114.3mm
Place of Origin:
China (Mainland)
Secondary Or Not:
Non-secondary
Application:
Oil Pipe
Technique:Cold Drawn/
Hot Rolled
Certification:
API
Surface Treatment:
Black,varnish
Special Pipe:
API Pipe
Alloy Or Not:
Is Alloy and Carbon Steel
Material:
34CrMo4,H40,J55, K55, N80,L80,M65,C90,T95,P110,Q125
Product name:
API-5CT Seamless Tubing

Packaging & Delivery
Packaging Details:
Seaworthy, Steel Shelf, Iron Pallet or as per customer's requirement
Delivery Detail:
20-55 days
API-5CT Seamless Tubing
Product Description
 Casing and tubing for Sour Oil and Gas Service must have a good anti-SSCC (sulfide stress corrosion and cracking) performance in the environment where hydrogen sulfide corrosion exists. After an indepth study, we has successfully developed tubular goods of the Cr-Mo series for this purpose with good hardenability and tempering stability that when tempering takes places at certain temperatures uniform and fine sorbite structures can be obtained. Their mechanical properties can meet fully the requirements of corresponding grades and their anti-SSC performance is excellent by regulating the chemical composition and adopting different heat treatment procedures
Characteristics:
1. Materials: The chemical compositions have been carefully determined to provide resistance to sulfide stress corrosion as well as to insure complete through wall hardening.
 
2.Heat Treatment: Quenching and Tempering are conducted under rigid temperature control to assure homogeneous physical properties and microstructures.
 
3.Micro Structure: These grades exhibit fully tempered martensite which is considered to be the most desirable for resistance to sulfide stress corrosion cracking.
 
4. Tensile Properties and Hardness: Yield Strength is limited within a narrow range and hardness is controlled to within the predetermined maximum limit.

5. Sulfide Stress Cracking (SSC) Performance: Whole grades are designed for 85% or 90% SMYS in NACE condition. Excellent SSC resistance has been achieved through rigorous, chemical composition, heat treatment, microstructure, tensile properties, hardness and so on.
 
Pipe inspection:
A full length non destructive inspection is performed in accordance with API 5CT for external and internal, longitudinal and transverse defects with a standard notch depth equal to 5% of the specified wall thickness.
 

Aluminum Precision Turned Parts

1. The hardness of the material is moderate, and the tool wear of the machining equipment and CNC machining center is small.

2. It can be precisely machined into various geometric shapes such as plane, cavity, shell, sphere, arc, and anisotropy.

3. It is not easy to stain and maintain. Aluminum precision parts, precision parts processing, CNC processing

4. It has good durability and is not easy to corrode. With special treatment process, the service life of parts is longer.

5. Aluminum is environmentally friendly and can be 100% recycled, with high recycling value.

The above five points are the material characteristics of aluminum products. Aluminum is a common material in CNC precision parts processing, with moderate hardness, durability and corrosion resistance. In addition, the cost of materials is appropriate. It is the preferred material for most parts manufacturers.

Aluminum Precision Turned Parts,Aluminum Cnc Turning Parts,Aluminium Cnc Turning,Cnc Turning Aluminum Parts

Stand Dragon Industrial Co., Ltd. , https://www.standdragontw.com