With the increase in the size of ceramic tiles, the increase in the degree of surface vitrification, and the popularity of polished tiles, the problem of slippage in ceramic tiles has attracted increasing attention. The main reasons for the smoothness of the tile surface are: smooth brick surface, less ash seams on the brick surface, water stains when used, hard sandals, and sand. Ceramic tile selection and use should pay attention to the following points:
 Cano tile   Carrie bathroom
(1) Large size bricks, 400mm squares and 500mm square bricks are rarely used in residential buildings. There are optional 300mm square bricks for the elderly and young children, and polished tiles should not be used.
(2) Hospital wards, nursing homes, kindergartens, etc. are not suitable for large-size polished tiles;
(3) Bathrooms and kitchen floors often have water marks. It is not advisable to use smooth-surfaced ceramic tiles (such as polished tiles and crystal glazed tiles), and it is best to use non-slip tiles with bumpy and concave textures on the surface.
(4) Enter the house to change non-slip slippers (rubber or soft plastic bottom), both non-slip, and sanitary (do not bring outdoor dust into the room);
(5) Use anti-slip agents sold on the market, one is to paste anti-slip stickers, the other is to smear anti-slip layer;
(6) If you do not buy a satisfactory anti-slip agent and want to take anti-slip remediation measures, it is recommended to apply polyurethane or polyester varnish to the surface of the brick, which can be coated or spot-coated. Good patterned leaks must be painted over 3 passes to give the coating a wear-resistant thickness.
Bathroom Tiles Floor Tiles Residential Paints Bathroom Tiles Bathroom Tiles Tile Tiles Kitchen Tile Tiles Specifications
Commonly used distance measurement methods include tape measure distance and photoelectric distance measurement. The measuring distance of a tape measure is measured along the ground using a tape-like ruler that can be rolled up, which is a direct measuring distance. Photoelectric ranging is to use an instrument to transmit and receive modulated light waves between two points, and measure the distance according to its propagation speed and time. It belongs to electronic physical ranging. Photoelectric ranging is indirect ranging.
Inch Tape Measure,Tape Ruler Measurements,Length Tape Measure,1 Inch In Tape Measure
Yucheng tengxu Measuring Tool Co., Ltd , https://www.hardwaretoolstape.com