Faucet lead exceeds the hazard of the tap to buy skills

Faucet lead exceeding the standard will seriously endanger the human body's heavy metal elements. Faucet lead exceeding the standard has the greatest harm to children and pregnant women. The children's weight, height, blood, digestive, urinary system, and hearing are all damaged, affecting the children's cognitive and psychological development; for pregnant women, it will increase the possibility of abortion, premature birth, premature rupture of membranes, and stillbirth. Therefore, Xiaobian will introduce the hazards of faucet lead exceeding the standard and faucet buying skills.

The harm of faucet lead exceeding the standard

Nowadays, taps such as American Standard and GROHE have been tested for excessive lead in taps and taps with excessive lead content have caused secondary pollution of tap water for the first time, which is detrimental to the purity and safety of water sources; secondly, lead has been used. Excessive levels of water dragons can cause human anemia, constipation, and body aches. If the body's mouth also contains heavy metals such as lead, it will lead to arteriosclerosis, gastrointestinal ulcers, and the latter's retinal hemorrhage. Severe cases can also lead to disability.

The excessive use of lead in faucets has the greatest impact on children and pregnant women. Because children and pregnant women have poor resistance, the use of taps with excessive levels of lead can result in children's high shot, blood, urinary system, digestion, and hearing impairment, affecting children. The psychological behavior has been intelligently developed; however, pregnant women using taps with high concentrations of heavy metals can cause miscarriage, premature birth, premature rupture of membranes, and stillbirths. Therefore, the excessive amount of lead in the faucet has a great impact on our lives, and it is enough to endanger personal safety.

When the human body is used for a prolonged period of time, such as taps that contain excessive levels of heavy metals, lead will enter the body, hindering normal blood circulation and synthesis and circulation, resulting in anemia, limb weakness, and constipation. If heavy metal such as lead enters the mouth, it can cause damage to the nervous system of the human body. In severe cases, it can lead to mental handicap disability. In light cases, it causes peptic ulcer, arteriosclerosis, retinal hemorrhage and other symptoms. Therefore, in the daily life of people, we must eliminate the use of taps with excessive lead content to ensure the health and safety of themselves and their families. It is necessary to pay attention to the lead time of tap water exceeding the standard, to make life safe and healthy, comfortable and energy-saving, and to eliminate the excessive lead incidents of such taps.

Faucet shopping tips

1, look for the brand is guaranteed

When consumers purchase taps, they should go to the formal market and buy well-known brands, so that they can choose to rest assured products. Using a tap is a matter of family health. It must not be cheap. Regular faucet packing boxes should have brand identification, quality assurance and after-sales service instructions. Remind everyone to buy it must be careful, in order to protect the lead content does not exceed the standard, try to choose stainless steel faucets.

2, observe the surface coating

In order to prevent the faucet from being oxidized, the faucet will be plated with a layer of nickel or chromium on the surface after being polished. Nickel or chromium has the function of resisting neutral hydrochloric acid, protecting the faucet from corrosion for a long time. When purchasing, look in a well-lit place. The surface of the faucet is free of oxidized spots, no air holes, no missing plating and blisters, and scorch marks. The uniform color without burrs and sand grains is a good product.

3, pay attention to the internal structure and material

When purchasing, please read the instructions to understand the internal structure of the faucet. Ceramic faucet faucets are recommended. They are made of high-durability ceramics. Even 60 pounds of water pressure can be switched freely without leakage. For washers, the recommended washers can withstand hot and cold water pressure without leakage.

4, inspection faucet switch structure

Finally, check the design rationality of the product. First move the switch a few times to see if the parts fit tightly and tightly. When turning the switch, feel soft. If the hand feels astringent or frivolous, it indicates that the assembly structure is unreasonable. When such a faucet is used, there may be insufficient water, or water leakage may occur when the water pressure increases.

Faucet maintenance tips

1, to ask experienced and qualified professionals for construction and installation. When installing, the faucet should try not to bump with hard objects, do not leave cement, glue, etc. on the surface, so as not to damage the surface coating gloss. Pay attention to remove the debris from the pipe and install the faucet.

2. The showerhead metal hose of the bathtub faucet should be kept in a natural stretch, and should not be coiled on the faucet when not in use. At the same time, when using or not using, pay attention to the joint between the hose and the valve body not to form a dead angle, so as not to break or damage the hose.

3, in the case of water pressure not lower than 0.02mpaz, after using for a period of time, if you find that the amount of water is reduced, or even the phenomenon of water heater turn off, you can gently unscrew the screen cover at the faucet outlet, Remove impurities, generally can recover freely.

4, when the temperature is lower than zero, if you find the handle feel abnormal, you must use hot water shower hot bathroom products to feel normal, in order to continue to use. On the contrary, it will affect the service life of the valve core.

5, because the water contains trace amounts of carbonic acid, and easy to form scale after evaporation on the metal surface will have a corrosive effect on the faucet surface, thus affecting the cleaning and service life of the faucet. Therefore, often use a soft cotton cloth or sponge with neutral soap water to wipe the surface of the faucet (Caution: It must not be wiped with corrosive or acidic substances), and then wipe the surface with a soft cloth. Hard particle scouring pad wipe. In addition, during use, care should be taken to prevent the faucet from colliding with a hard object and damaging its surface.

6, switch taps do not use too much force, gently turning homeopathic can. Even a traditional faucet does not need to be screwed to death. In particular, the handle cannot be supported or used as a handrail.

7. The phenomenon of water dripping after the faucet is turned off is because there is still some water in the cavity after the faucet is closed. This is a normal phenomenon. However, if dripping occurs for a long period of time (more than ten minutes), it is a faucet leak, which is a product quality problem.

Editor's summary: The dangers of tap water exceeding the standard and faucet selection techniques are introduced here. We hope to help everyone. If you want to know more about yourself, you can follow the information on this site.

Faucet faucet lead exceeded

Ball Cock

A ballcock (also balltap or float valve) is a mechanism or machine for filling water tanks, such as those found in flush toilets, while avoiding overflow and (in the event of low water pressure) backflow. The modern ballcock was invented by José Antonio de Alzate y Ramírez, a Mexican priest and scientist, who described the device in 1790 in the Gaceta de Literatura Méxicana.[1] It consists of a valve connected to a hollow sealed float by means of a lever, mounted near the top of the tank. The float is often ball-shaped, hence the name ballcock. The valve is connected to the incoming water supply, and is opened and closed by the lever which has the float mounted on the end. When the water level rises, the float rises with it; once it rises to a pre-set level, the mechanism forces the lever to close the valve and shut off the water flow. This is an example of negative feedback and of proportional control.

Ball Cock, Brass Ball Bibcock, Ballcock Valve, Toilet Ballcock Valve

ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsirvalves.com