The toilet is a kind of sanitary ware commonly used in our life. It makes our life more convenient. There is a flange ring at the bottom of the toilet. It can play a role in preventing water leakage and is an important part of the toilet. Then how long does the toilet change back to the flange ring ? How to install the toilet flange? The following article will introduce it to you.
How often does the toilet change back to the flange ring?
The toilet flange, which is also the sealing ring of the toilet, is usually installed at the bottom of the outlet of the toilet to play a sealing role. If the toilet does not leak water, it means there is no problem with the toilet flange, and the flange does not need to be replaced. Circle, how long does it take for the toilet to change back to the flange ring , it is best to wait until it has problems and then replace it, or replace the toilet when the replacement of the new seal.
The role of the toilet flange
1, the toilet flange has a sealing effect, to avoid sewage in the toilet outside the sewage pipe, but also to avoid the stench ups and downs of the sewage pipe.
2. The toilet flange sealing ring can also play a fixed role when we install the toilet to prevent deviation of the toilet's sewage outlet, and it also facilitates future maintenance.
How to install the toilet flange
1, first need to close the toilet water valve or total water valve.
2. Wash off the water in the toilet bowl and the toilet bowl.
3. Use a sponge or towel to dry the remaining water in the toilet bowl and bowl.
4. Use a lubricating oil and pliers to secure the toilet bowl to the nut cover on the floor and remove the nut.
5, disconnect the water supply pipe, gently shake the toilet, the wax seal and glass agent release, and then need to carefully grasp the potty, do not hold the water tank, otherwise it is likely to cause damage to the water tank and the potty joints.
6. Remove the old wax seal on the joint surface of the toilet.
7. Disassemble the new flange ring and allow it to circle side up. Place it over the flange on the floor so that it is located on the opposite side of the opening to ensure that the two screws are in place.
8. Lift the toilet and place it over the flange and wax seal to keep the toilet level.
9, on the toilet, the new toilet flange seal, need to keep the potty level.
10. Reinstall the newly disassembled nut to avoid cracking the bottom of the toilet bowl.
11. Connect the water supply pipe, open the water valve, and let the water tank of the toilet fill the water, and then flush the water frequently to see if there is a leakage phenomenon.
12, the best in order to make the toilet more fixed, you can in the potty and floor gap dotted glass glue, it is successfully installed.
The article is summarized: The above is about the toilet for how long to change the flange ring and the toilet flange how to install the relevant introduction, I hope you can understand how to install the toilet flange, if the home needs to replace the flange ring can refer to the above steps or please Special maintenance personnel will replace it.
Container House,Container House For Workshop,Foldable Container House,Container House For Apartment
HEBEI KAYI BUILDING MATERIAL TECHNOLOGY CO.,LTD , https://www.kayigrating.com