Product type water stop strip It is a new type of waterproof material that has both the performance of general rubber products and self-expansion with water. Water and water resistance are more reliable than general rubber waterstops. The water stop strip has higher hardness than the ordinary water stop strip, large expansion ratio, good high and low temperature resistance, good recovery type and good elasticity.
The product type water stop strip is a new type of waterproof material which has both the performance of a general rubber product and the self-expansion of water. Waterproof, waterproof effect is more reliable than ordinary rubber waterstops.
Product type water stop strip construction process
1. For the reserved way of pasting, in the cast-in-place concrete, it is necessary to reserve the upper water stop groove (can be reserved in the template).
2. After the pre-cast concrete formwork is removed, the PZ-250 product type water-expanding water-stop strip clears the surface, so that the seam surface is water-free, clean and free of debris.
3. Insert the water stop strip into the reserved slot. If the groove is not reserved, the vertical seam can be added with the full length of the adhesive, or the cement nail can be used to fix the product type water stop strip; the horizontal seam can be directly attached to the concrete surface.
4. The concrete should be poured as soon as possible after the product type water stop strip is pasted.
5. During the installation and paste process, the water stop strip should be protected from contamination and water, so as not to affect the use effect.
Note: All product images are taken in the field of our company, please do not steal. Our company has established long-term cooperative relationship with China Communications First Bureau, China Railway Fourth Bureau, China Railway 16th Bureau, China Railway Port and Air Transport Bureau. All products are guaranteed quality and quantity, factory direct sales, reasonable price, if you have the willingness to purchase, you can come to me. The company visited and negotiated. Technical line
Http://news.chinawj.com.cn
LED Sensor Batten Lights has options of microwave sensor and infrared sensor. There are two sensing modes. One is 0-10v dimming, and the other is on/off.
The main difference between these two modes is that the 0-10v dimming mode can set the brightness of the light after the person walks, and the pending time of this brightness can also be set. On/off mode, you can only set the time for the lights to turn off after a person walks, but not the brightness (that is, functions 3, 4 cannot be implemented). The 0-10v dimming mode is more intelligent.
Briefly introduce the function of sensor light:
1. Set up daylight threshold: If the ambient light is higher than the set brightness, the sensing function will not be triggered.
2. Set up the hold time: The time for the light to maintain brightness after the person walks away.
3. Set up a stand-by dim level: set the brightness maintained after the person walks
4. Set up stand-by time: After the person walks, the time to maintain low brightness
5. Set up detection area: Set the detection area.
Toggle button can set the remote distance of remote control and sensor.
If you need sensor lights in factories or warehouses, corridors, or other indoors, you can choose this LED Sensor batten lights. If you need IP66 sensor light, you can choose Sensor Waterproof Light.
Motion Sensor Led Light,Sensor Led Light,Motion Sensor with Led Light,Led Light Motion Sensor
SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelight.com