Everyone knows that renovation is a cumbersome and troublesome matter, so you must know some steps to decorate, so as not to affect the progress of the renovation. The owners who bought the house for the first time did not have the experience of decoration. They did not know what to pay attention to when decorating the house. They knew nothing about the renovation process steps of the new house and would definitely be in a hurry. The decoration home network Xiaobian has integrated the detailed steps of the eight new home improvement process steps . The article also attached the precautions for the first renovation of the house, hoping to provide some reference for the friends who renovated the house for the first time.
Steps in the home improvement process, tools in place, ready
Before you decorate, you have to put a few things in your bag. Tape measure (buy 5m, do not 3m), calculator, large board clip (clip list, receipt); In addition, it is best to prepare old towels at the construction site (soft cotton, paste bricks) , plastic bag (wrapped on the pipe joint to prevent dirt from clogging)
Step 2 of the home improvement process, choose a good day, start the shooting
Before the workers enter the scene, it is best to measure the corners of the home and measure them yourself. Write down the pen ruler and mark it clearly. Be sure not to be lazy. The contents of the measurement mainly include:
1. Identify the area involved in the renovation process. Especially the tile area, wall paint area, wallpaper area, floor area;
2. Identify the main wall dimensions. In particular, it is necessary to design the wall size of the furniture in the future.
Step 3 of the home improvement process, the main body is demolished to make the space more practical
The main body demolition is the first project, including the demolition, wall building, shovel wall, demolition of heating, plastic steel windows and so on. The demolished garbage should be cleaned up in time to ensure the cleanness of the room, also for the convenience of construction.
Step 4 of the home improvement process, hydropower transformation, and arrange the use of each space
Hydropower transformation, no regrets to eat. The brick is on the wall and the ceiling is on the top. If you want to add a socket, it will be difficult. Therefore, be sure to determine the exact location of switches, lamps, basins, bathtubs, washing machines, etc.
Before the hydropower transformation, the cabinet designer should go to the door for the first measurement to help you determine the power and waterway transformation plan.
Water heaters, it is also best to send people to design the location of the power supply and interface according to the model you have determined.
Remind you: On the wall below the basin, it is best to leave the power socket for easy loading.
Place the air-conditioning hole and power supply on the wall of the bed as much as possible to prevent the air conditioner from blowing directly to the person.
Strong power and weakness should be kept at a distance of 20 cm. For example, a distance of 20 cm should be left between the socket and the network cable.
Step 5 of the home improvement process, pack the riser, wrap the ugly pipe
Taking into account the easy and humid environment of the kitchen and bathroom, the material of the riser must not be used with wooden keels! Everyone must be careful, even if the anti-corrosion coating on the wooden keel is not enough.
Remember, the bag riser uses a light steel keel, or a red brick. Light steel keel province, but the most solid and easy to use is red brick.
Step 6 of the home improvement process, tiling, the first thing with a physical texture
Before you tiling, buy a floor drain.
Note: To buy a special washing machine or shower for floor drain, and to deodorize.
After waterproofing and pulling, you are ready to tiling.
In addition to the normal tiling attention, the tiles are soaked in water and dried in the shade; the broken tiles are left for cutting, and I personally emphasize the overall beauty of the tiles. Simply put, it is the brick on the wall, the width can not be less than 10 cm. This situation is often encountered when tiling, for example, the wall width of 1 meter, the brick is 32*32cm, the normal decoration method, 3 whole and 1 small. However, 32 × 3 = 96, but also reserve a space of 1 cm for the joint space, and finally the small brick can only be 3cm wide. It's not that I'm picky, a narrow brick is stuck there, how ugly it is.
As long as you explain clearly to the bricklayer master in advance, the bricks on the upper wall should not be less than 10 cm wide. He will cut bricks on both sides. Or take the example of a wall that is just 1 meter wide, it will become 2 whole 2 small. 32 × 2 = 64, reserve 1 cm of joints, 17.5cm of small bricks on both sides. In this way, it seems that the two sides are not only symmetrical, but the whole wall will not be narrow and narrow.
However, this practice is expensive, please buy a wealth before you buy bricks.
Home improvement process step seven, oil workers battle, scrub brush
If you don't buy a finished door, let the worker master do it.
Note: Any woodwork, even if it is just a mouthwash, must follow this step, the large core board sinks, the veneer is veneered, and then it can be painted. When mixing oil, there is an irresponsible worker who is lazy and paints oil directly on the large core board. This is absolutely wrong. Don't believe in the nonsense of selling large core boards, it's okay to brush oil directly on it. Remember, brush oil directly, it will take a long time to crack all, remember to remember.
Now do the mixing, do not use the brush, but use the spray. It is best to let the workers spray the white inside the door and the meter box together. It is not wasteful and beautiful.
There is nothing to say about the brush wall, leveling, sanding, rolling brush, the effect is good, absolutely rely on the craft of your home oil workers.
In addition to the wallpaper, my home is white lacquer, no color. Need to remind everyone, if the wall to brush the color, the color must pay attention to, the color of the call is lighter than the color card, must not be the same as the color card or deeper than it, or you will regret it. Because the wall is painted at least twice, and some are three times, the color of the upper wall will be one layer deeper than the other.
Whether the painting method is spraying or rolling, the benevolent sees benevolence, the wise sees wisdom. I used a roller coating and I didn't try to spray it. It is said that the effect of spraying is better, but once it is damaged, it will become difficult to make up the paint.
Home improvement process steps eight, wallpaper, beautiful wall
Sticking wallpaper is much better than brushing wall paint.
After the wall paint is brushed, the oil union will brush the nitrocellulose paint in the place where the wallpaper is needed. The paint can be dried every other day, and then the master can paste the wallpaper. I was initially worried that the wallpaper would dirty the white wall that was brushed. Later, I found out that it was a very clean job when I posted it! My worry is completely redundant.
Note: Do not open the window for ventilation within 48 hours after the wallpaper is posted, let it dry slowly.
Say good to the master, if you are in a position to pick up, you have to trouble him to help repair it.
The above is the information about the home improvement process steps brought by the decoration home network Xiaobian, I hope to help everyone. If you still want to know more, please continue to pay attention to our decoration encyclopedia!
More related wonderful reading:
What are the decorative home improvement processes, what should you pay attention to?
Simple and practical home improvement process, learn to follow! !
The fatigue resistance of plastic-coated steel wire ropes is good. For example, the durability of steel wire ropes with nylon coating and nylon core is about 2 times that of ordinary hemp core or metal core (see rope core) steel wire ropes. Plastic-coated steel wire ropes are mainly used in mine hoisting cages, hoisting machinery in meat processing plants, seagoing ship anchors, towing and fishing operations, fishing vessel trawls, etc.
Nylon Coated Wire Rope,Nylon Covered Steel Cable,Nylon Coated Steel Wire Rope,Nylon Coated Stainless Steel Cable
Jiangsu Hongze Stainless Steel Wire Rope Co., Ltd , https://www.hzrope.com