Stainless steel pipe factory introduced that stainless steel countertop drum injection repair feasible A certain owner Mr Zhu posted on a home forum, said his own stainless steel countertops from a large area, basically "can not put the cutting board." The manufacturer gave him two treatment opinions. One was to punch and glue the adhesive under the countertop; the other was to simply change the stone, but the sink welded to the original table must be abandoned. He disagreed with the damage to the lower part of the countertop, and he lost his reputation because he lost several thousand brand-name sinks because he changed the table. So, how do you solve the problem?
Stainless steel pipe factory introduction, the reason why stainless steel countertops will appear to be a large area from the drum because of the stainless steel table adhesion process problems, that is, direct adhesion between the stainless steel plate and the liner using strong glue, generally after 3-5 years of use The phenomenon of separation of the steel plate from the liner plate is very likely to occur, and such problems are not directly related to the design and installation.
As for the method of repairing countertops, Bai Xiaodong stated that at present there are generally two methods. One is to use a high-powered hair dryer to heat the shedding area, melt the internal glue, and then press and cool to re-bond the steel plate and the liner from the area. The other is to punch holes in the underside of the table and then re-inject the glue for bonding. The latter is more effective. In other words, the repair method provided by the manufacturer is actually feasible. Only the lower part of the table may not be repaired, which requires the owner to measure it.
The stainless steel knowledge comes from
Pool Light,Wall Mount Swim Pool Light,Led Swimming Pool Light,10W Swimming Pool Underwater Light
Shenzhen Poolux Lighting Co., Ltd. , https://www.pooluxled.com