1. Three months to add grease to the bearings of the vibration motor. In general, the amount of oil added is one-half of the bearing volume. If the vibrating motor hears an abnormal sound during operation, it should stop the operation immediately, check what is the fault, and then start the operation again after the problem is solved.
2. Generally speaking, the vibration motor should be repaired once within six months of operation. The main job is to clean the dust inside and outside the body, check the safety of the line, check whether the bolt is loose and the wear of the bearing. Also pay attention to the replacement of grease.
3. If you need to update the bearing, remember to buy the original bearing. When installing the eccentric block to adjust the vibration force, the inner side of the two sides is a fixed eccentric block, which must be coincident with the axial aspect, and then the outer adjustable eccentric block on the two ends of the shaft is adjusted to the same angle in the same direction to avoid the error. To stimulate the force. This can reduce the occurrence of accidents.
Concerned about surprises
Label: Three great tricks to maintain the vibration motor!
Previous: Common methods for chemical instrumentation in petrochemical industry Next: Maintenance measures for steam roller crusher
Mild steel, sometimes referred to as carbon steel or ordinary carbon steel, is defined as having a carbon content of no more than 2% and no other perceptible alloy elements.
This steel is produced on a large scale and is the largest part of the steel production industry. You will be able to find it in various applications, fasteners and fasteners.
Generally, this kind of steel has high strength, high hardness and magnetism, and is usually used in motors and electrical appliances - however, their corrosion resistance is poor, and should not be used in corrosive environment without protective coating or coating.
There are some differences between low-carbon steel and steel, because steel has lower toughness and greater brittleness, and low-carbon steel can be further strengthened by adding carbon.
If you need more information or want to order carbon steel products, such as hexagon Bolts, carriage bolts, flange bolts, U-bolts, union bolts, expansion bolts, threaded rods, please contact us.
Carbon Steel Bolts,High Carbon Steel Bolts,Bolt Carbon Steel,Carbon Steel Fasteners
Taizhou Hongchuang Hardware Co., Ltd. , https://www.taizhouhongchuang.com