There was a specific renovation when we were at home. So we can't avoid our punching. But everyone can't underestimate this. Because it can't be as simple as talking on paper. Everyone has to have some skills in the specific operation. Below, everyone and the decoration of the small series to understand, what are the methods of wall punching ? This will have a reference when we operate.
First, what are the methods for wall punching?
1. First come to understand how there are several ways to fix the shelf on the wall. Our well-founded choice. A narrower one can first nail a wooden strip on the wall. The weight of this method is relatively large but the groove is to be deeper. The usual red brick wall surface can be directly nailed with cement steel nails. If it is a concrete wall surface, it must first be punched with a hammer and then tapped into the hole with a wooden wedge to nail the wood strip.
2. The next step is to say that the next step is to fix the shelf on the wooden note. This step is very important. Do not use other wooden boards and wooden notes to flatten and then nail the veneer to paint. But when it is fixed on the corner, it means that the robust shelf can be properly widened.
3, down to understand the construction, there is what you said first slot on the wall. This time is even more critical. Then insert the board into the gap next to it and fill it with cement. Generally speaking, the width of the shelf should not exceed 30 cm and it must be supported if you want to be a desk.
Second, what are the taboos on the wall punching?
1. First of all, remember to pay attention to the wall when punching holes. This kind of attention is safe. Don't pay attention to the speed of the figure, pay attention to the dry powder card drill. When drilling the wall, the drill bit must be stable. Do not shake it to the left. Because you shake it together, it is equivalent to increase the friction of the drill bit.
2, the idea of ​​anxious is to have to think about one after another, pay attention to the strength when pressing down. This will help with the construction. When it is difficult to hit or slow down, be sure to pull out the drill bit to investigate whether there is a brick core broken in the drill bit. It is best not to add water to the drill bit and then drill the hole in this way, because only a small amount of water is needed to increase the friction of the drill bit, which is more difficult than dry or water.
3. Everyone needs to know that we need to pay attention to our construction status. If you want to find a professional punching company or personnel before drilling, there may be accidents that threaten the interests of the owners. In the calculation of the drilling cost, the details are strengthened to prevent the situation from being regretted.
For the opening of the wall, everyone has to understand. Because this is not a simple matter. Special care must be taken when operating. Otherwise it will break our wall. If you have any knowledge of home improvement. Remember to visit our decoration home. Our home renovation website will constantly update home improvement information.
Customized Laboratory Table Frame
Customized Stainless Steel Cart Frame,Customized Laboratory Table Frame,Customized Aluminium Chassis Frame,Stainless Steel Restaurant Tables
MGX Metalworks Co., Ltd. , https://www.mgxmetal.com