What should I pay attention to when installing the bathtub?

The bathtub is a kind of shower ware which is common in the modern bathroom space. The bathtub can bring the same feeling of comfort as the hot Spring bath in the bathing process. It is generally suitable for the bathroom with large sanitary space and obvious wet and dry partition. The installation of the bathtub is not as simple as the basin and the faucet. What do you need to pay attention to when installing the bathtub? Still come to listen to today's Xiaobian for you to explain one by one.

1. If you choose a skirt bathtub, the bottom of the skirt should be close to the ground during installation. The floor should be reserved for 250~300mm holes in the drainage area for drainage installation. The inspection hole is installed in the wall of the bathtub drainage end. For future testing.

2, if you have chosen other types of bathtubs, then you can determine the height of the plane on the bathtub. Then install the bathtub after laying two brick foundations. If you need to build a skirt wall on the side of the bathtub, install a manhole in the drain of the bathtub or open a manhole on the wall at the drain end.

3. After the bathtub is installed, it is necessary to pay attention to the installation of its supporting hardware. Of course, the faucet is the key point. The height of various bathtubs, hot water taps or mixing faucets should be 150mm above the plane on the bathtub. The chrome plating should not be damaged during installation. The chrome cover should be in close contact with the wall, and the quality of the faucet should be paid attention to.

4. If the bathtub is equipped with a shower, the height of the fixed shower and hose shower can be installed according to your own needs during installation.

5. The upper surface of the bathtub must be leveled with a horizontal ruler and must not be inclined. Apply sealing glue to the side of the upper side of the bathtub and the wall surface to prevent it from being moldy due to poor hygiene. This will affect the health of your family.

6, the bathtub drain and drain pipe connection should be firm and compact, and easy to disassemble, the joint should not be open.

7. After the installation of the water parts is completed, it should be checked whether the water outlets are smooth, and the water removal valve is closed, the water is stored in the bathtub, and the water will be leaked. Finally, the water is turned off to observe whether the drainage speed is normal, and see if There is no water spilling from the bottom of the bathtub to the outside. If you find that there is a problem, you can solve it immediately. Of course, you need to check the installation personnel until it has no problem.

8. After the bathtub is installed, if the other sanitary wares have not been installed yet, you should pay attention to the protection of the bathtub, and wrap the bathtub together with a cardboard box to avoid the surface of the debris.

Through the above explanation, I believe that you have already noticed what you need to pay attention to when installing the bathtub. Of course, in order to ensure the quality of the installation, it is recommended that you find a professional installer to install it.