General sockets are installed during the renovation of a new house, and 5-hole sockets are the choice of most families. Relatively speaking, they are used more frequently and the installation of sockets is reasonable and correct. In this way, we will be more convenient and safe in our lives after we check in and avoid many unnecessary accidents. Then let's take a look at the five-hole socket wiring and installation of five-hole socket precautions.
How to connect 5-hole socket
1. When installing the 5-hole socket wiring, we first need to prepare some tools so that it will be more rapid and convenient during the installation process. If these tools are not available, the socket wiring may not be completed. To prepare: vise, scissors, tape, five-hole socket has three holes on the back of the three holes, each hole marked with L, N and another symbol E This is the ground wire.
2. Then, using our prepared vise, pick up the thread and remove the insulating part of the length of about three centimeters in front of it. Then the copper wire will be exposed. The two threads will be screwed together and pass through the hole. Then the screw is screwed on. If there is more than one part of the thread, it can be cut with scissors. According to the normal situation, the fire line is generally red, the neutral line is yellow, and the ground line is black. It is better to test with a pencil before wiring.
3, there is the correct way to connect the five-hole socket, do not connect the wrong line, on the left to connect N, L on the right, the middle of the E, when the wiring is first from the three-hole socket FireWire, and the zero line Lead a line to the two holes of the fire line and the zero line. After the connection is completed, connect the live line, neutral line, and the bottom line of the power cord to the corresponding places. After the connection is completed, put the frame up and screw it on.
Installation of 5 hole socket precautions
1. When we installed the socket, we could learn this kind of knowledge first in physics. I believe we all know that "left zero, right fire" and then the socket hole is placed horizontally. If the socket hole is placed vertically, it shall be “ignition and zeroingâ€. The three-hole socket shall be “left-zero and right-fire†and the protective grounding should be at the top. Zero line and protective grounding must not be connected wrongly, nor should the neutral line and protective earth ground be connected together. They should be checked against the color of the wire.
2, then our home is only the environment of the bathroom and kitchen will be more humid, then we choose the five-hole socket must have a waterproof and splash-proof function, kitchen, bathroom, five-hole socket outlet installation as far as possible away from the water area. If you need to approach, when you add a socket with a splash box, you can set a hair dryer and a shaving power outlet next to the mirror, and it is advisable to leave the floor 1.5 to 1.6 meters.
3, generally mounted five-hole socket in the best distance from the ground is not less than 1.8m, the concealed five-hole socket from the ground distance of 0.3m is better, the child has the best to buy a home with insurance cover Safety socket. The height of one-room indoor socket should be the same, the on-off position of the switch should be the same, each wall of the living room and bedroom, and the distance between two sockets should not exceed 2.5 meters and the corner of the wall should be within 0.6 meters, and at least one spare five-hole socket should be installed. .
Summary: About how 5-hole socket wiring, as well as information about precautions 5-hole socket installed on the introduction here, I hope these help you. If there is something that you do not understand, you can pay attention to more content. If you want to learn more about building materials, please continue to pay attention to our website.
Chuzhou Jincheng Metalwork Co.,Ltd , https://www.jinchengscaffold.com