Application and protection of vehicle bearings

Source: China Bearing Network Time: 2017-09-19

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The vehicle should be operated within an additional load range; if it is severely overloaded, it will directly cause bearing overload; it will cause early failure of the bearing; more serious is the formation of vehicle faults and personal safety accidents.
Stop the bearing from being subjected to abnormal impact loads,
Regularly check the operation status of the bearing; pay attention to investigate whether the bearing part has abnormal sound and partial sharp temperature rise appearance.
Regularly or quantitatively add lubricating oil or grease as required.
According to the vehicle operating conditions; at least once every six months to completely replace the lubricating oil; and carefully look at the bearings,
View under the condition of bearing protection: Clean the bearing under disassembly with fire oil or gasoline; carefully investigate whether the cylindrical surface of the bearing table has sliding or moving appearance; whether the bearing surface of the bearing has no falling off or pitting; Whether the rolling body and the cage can be worn and deformed; the induction condition according to the bearing view; whether the bearing can be continuously used.

Recommend to friends comments close window

Bearing related knowledge

The basic concept of one-way bearing The common fault of the sliding bearing is analyzed. The description of the bearing material of the slewing bearing device and the implementation of the new technology of the thermal processing of the bearing data

This article links to http://
Please indicate the bearing network http://

Previous:TIMKEN Bearing: Fault Diagnosis and Disposal Next: Analysis of Heat Treatment Process of Bearing Roller

U Bolt

Hebei Qianmu Fastener Manufacturing Co., Ltd , https://www.qmjgjfasteners.com