 |
The quality of new solar cells is lighter and more flexible than traditional silicon-based batteries, creating a new path for the application of photovoltaic technology. Dye-sensitized solar cells (DSSCs) not only have the characteristics of light weight and high efficiency, but also have low production cost. The new single-line solar cell developed by Cao Anyuan, a professor at Peking University’s School of Engineering, and colleagues will greatly expand the application of dye-sensitized solar cells, and it may be used in the future for large-scale solar arrays.
A dye-sensitized solar cell is a new type of thin-film solar cell, which has a low production cost, a simple manufacturing process, and can be prepared by a relatively simple electrochemical treatment. The dye-sensitized solar cell itself is simple in structure and consists of an anode and a cathode immersed in an electrolyte. The anode of a dye-sensitized solar cell is usually composed of a dye compound and titanium dioxide. The former absorbs sunlight and generates free positive and negative charges; the latter acts as a conductor to cause charges to flow to respective electrodes and generate electric current.
Professor Cao Anyuan and his colleagues greatly reduced the size of dye-sensitized solar cells by wrapping titanium wires on dye-coated titanium dioxide tubes. As a negative electrode, a layer of nano-carbon network tube is also wrapped on the outside. Carbon nanotubes are highly conductive and have high transparency. These advantages make them ideal light-absorbing materials.
Dye-sensitized solar cells also have good photoelectric conversion efficiency, with a conversion efficiency of 1.6% per line. Although there is a large gap between the standard conversion rate of dye-sensitized solar cells, the conversion rate can be greatly improved by improving the circuit design.
According to researchers, this dye-sensitized solar cell can be used in textiles. Fibrous solar cells are very flexible and can be easily used on clothes, backpacks, and curtains. (Translation: Owen)
Resin bond is a kind of organic bond, the grinding wheel made of this bond has high strength, has certain elasticity, low heat resistance, good self-sharpening, easy production and short process cycle. It can manufacture Grinding Wheels with working speed higher than 50 m/s and very thin grinding wheels. Its application range is second only to ceramic binder, widely used in rough grinding, waste grinding, cutting and free grinding, such as grinding steel ingot, casting burr etc.. Can manufacture high speed, high finish grinding wheel, heavy load, cutting and various special requirements of grinding wheel.
In tool grinding, the cutting tool materials with high hardness, thermal hardness, wear resistance and enough strength and toughness, such as carbon tool steel, alloy tool steel, high speed steel, hard alloy, etc., are grinded with resin strong grinding wheel to achieve ideal accuracy. The surface roughness and correct geometry make the cutting edge have high sharpness and durability
Saw Blade,Brazing Diamond Saw Blade,Diamond Key Chain Saw Blade,Abrasive Paper Grinding Sheet
Henan Jinlun Superhard Material Co., Ltd , https://www.jinlunsuperhard.com