>>>Links: Graphic explanations: 16 steps to correctly lay the tiles
Floor Tiles Selection: Floor Tile Selection Tiles should be flat, uniform in color, neatly edged, complete in edges and corners, free from damage, and have product certification.
Tile construction:
1) Before the construction of the floor tiles, the floor tiles should be soaked in water, which should be soaked in the next day, and dry to the surface without water stains before paving.
2) Before the construction of the floor tiles, a reference line should be displayed on the floor.
3) When the floor tiles are being constructed, the concrete floor should be moistened with water. Apply cement mortar (including 20% ​​of 107 glue) on the back of the floor tiles. Lay out on the basis of the reference line and work closely together. After the second time, the line should be pulled. Check the seam straightness and adjust it immediately. Check it after every paving.
4) The bathroom, kitchen, balcony, floor tile, must be inclined to the floor drain, the slope is controlled at 2% (3mm).
5) The dry shop shall be leveled on the floor according to the horizontal line of the projectile, and the sample shall be placed within two meters, and then the inspection shall be carried out with a two-meter ruler for acceptance. Is the paved material applied with 10:1 yellow sand and cement? Evenly, flattened and compacted.
>>> Links: How to Lay Kitchen, Bathroom Tiles
Acceptance of floor tiles:
1) The error within 2 meters shall not be greater than 2mm. The brick joints shall be neat and uniform in size. There shall be no hollowing or loosening. Acceptance shall be carried out with a ruler or ruler with a length of 2 meters.
2) In the acceptance process of the floor tiles, use a hammer to gently tap on the ground, without empty drums.
3) The slope of floor tiles with drainage requirements shall meet the requirements of drainage. Attention shall be paid to the joints with floor drains during inspection and acceptance.
Ground acceptance cement floor tiles bathroom floor tiles
CS07A 0.6N.m 3 Gears Torque Adjustment Electric Screwdriver
Household Electric Screwdriver,Mini Power Screwdriver,Mini Tool Kit,Screw Driver Power Tool
SUZHOU CREATION SPACE INTELLIGENT TECHNOLOGY CO.,LTD , https://www.pkanglegrinder.com