Talking about the correction of bearing alignment function

Home>Bearing knowledge>About: Correction of bearing alignment function
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Talking about the correction of bearing alignment function

Source: Bearing network time: 2018-05-08
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
The rolling bearing can actively compensate the relative deflection of the bearing and the center line of the bearing seat; then the ability to ensure the normal working condition of the bearing is called the self-aligning of the rolling bearing.
Because of the machining and device errors of the bearing housing bore and the shaft; and the bending deformation of the shaft after loading; the axis and the inner and outer ring axes are unlikely to adhere to each other during operation; a certain deflection will occur. The axis deflection will cause the bearing Uneven distribution of internal contact stress. Early failure of bearing formation. Therefore; usually depicted; should be as much as possible to improve the installation and depiction requirements; for the case of large deformation of the winding should be selected bearings with good centering function.

Recommend to friends comments close window

Bearing related knowledge
SKF bearing skills: applied to machine tool spindles
NSK bearing radial clearance adjustment method for the rolling bearing data "basic needs analysis"
Vertical belt bearing self-aligning bearing classification
Skf imported bearings fault identification skills several ways


This article links to http://
Please indicate China Bearing Network http://

Previous: Painting Skills: Automotive Bearing Protection 诀窍 Next: Bearing Locking Method

Digital Display Hydraulic Compression Testing Machine

Concrete Compression Testing Machine,Construction Lab Equipment,Brick Compression Testing Machine,Cement Compression Testing Machine

Jinan Chenda Testing Machine Manufacturing Co., Ltd. , https://www.jncdtester.com