The maintenance of the lathe is the key factor for the normal operation of the equipment, including the lubrication and maintenance of the lathe. Like the safe operation rules of the lathe, the lubrication of the lathe can protect the lathe in a poor environment and long-term work, and can also play the role of rust prevention, vibration damping, sealing, power transmission, etc. For the maintenance of lathes, it is to better use the equipment and extend the life of the equipment.
1. Lubrication of the lathe
1. Lubrication by oil pouring: The rail surface of the bed is large, medium and small, and it is lubricated with an oil pot, once per shift.
2. Oil splash lubrication: Inside the gear box of the lathe and the inside of the spindle box, it is usually replaced every three months.
3. Lubrication of oil rope: Lubrication in the feed box of the lathe, put the oil rope into the groove and lead it to the required lubrication part.
4. Lubrication of the billiard oil cup: the lathe tailstock, the middle and small skateboard rocking handles rotate the bearing parts.
5. Grease cup lubrication: the middle gear of the lathe hanging wheel box.
6. When working, pay attention to check whether the oil quantity of each lubricating part is sufficient or oil leakage.
2. Maintenance of the lathe
1. Clean the lathe scraps before leaving work;
2. Wipe the machine tool clean, keep all parts free of stains, and no water traces on each guide surface (large, medium and small);
3. Each rail surface (large, medium and small) and tool holder are added with oil to prevent rust;
4. Cleaner, quantity, fixtures, and clean return;
5. Clean the site, ensure that there is no swarf or garbage under the machine, and keep the working environment clean.
6. After each work shift, the total power of the machine tool should be turned off.
7. Fill in the operation status of the machine tool (fill in the shift record book).
The safe operation of the lathe is very important. We must strictly abide by the safe operation rules of the lathe, and complete the relevant operations in order according to the steps and order. It is also important for the maintenance of the lathe. Only after the maintenance work is done, can the equipment operate more normally. Whether the equipment can run normally and the service life depends on whether the maintenance work can be done, and whether the maintenance work is often done. Therefore, whether it is a safe operation procedure or maintenance method, it is very important in the actual use of the lathe.
For more technical specifications on lubrication and maintenance of lathes, please pay attention to the brand: JZROBOT (Jiezhong Robot)
================================================== ================================================== ======
Sand Paper Roll,Aluminum Oxide Abrasive Sanding Paper Roll,Green Sandpaper Roll,Abrasive Sandpaper Roll
Foshan Nate Abrasive Science & Technology Co.,Ltd , https://www.nateabrasives.com