The toilet is indispensable in our daily life, so it will take a long time. It will inevitably lead to some minor problems. For example, the toilet is blocked, the toilet tank can't store water, etc. What is the cause of the toilet water tank toto ? How to solve it? Toto broken toilet How to repair it? Let's see it together.
What is the reason why the toto toilet tank is still running ?
1. Some plastic flushing switches for flush toilets wear out for a long time and occasionally get stuck, failing to reposition; this will cause the water in the tank to flow;
2. If the water level limit device in the water tank is loose or too high, it is easy to cause the water level of the water tank to overflow the overflow water level and flow into the toilet from the overflow pipe.
3, outlet rubber plug if there is damage or foreign body obstruction and lead to plugging is not strict, it will result in toilet water more than.
Toto toilet tank how to deal with the solution:
1, can check the flush switch is reset, generally repeat the switch can be reset several times;
2. Check whether the water level limit device of the water tank is abnormal.
3, check the water tank outlet rubber plug if there is a blockage, if any, clean up on the line.
If there is a problem with the water tank fittings, we can also manually exclude them, such as the buoyancy ball can not rise up, closed mouth is not aligned, the water level is too low can not effectively lift the float ball, if it is a broken accessory, please ask professional Maintenance master changed.
Toto toilet how to repair:
1. First, make sure that the water closet valve of the toilet is in the closed position. After removing the float valve plunger from the toto toilet, one or two gaskets or seal rings will be seen. If any of these parts fail, the water will Will continue to flow out of the valve plunger, the toilet tank will continue to flow, so check all gaskets, if damaged, replace immediately.
2. If the float valve is sealed, replace it entirely. This requires turning off the water from the toilet bowl at the water shutoff valve, emptying the water in the tank, and then unscrewing the float arm from the old ball valve and removing the water injection pipe from the overflow pipe; find the coupling nut or sliding nut under the tank. , Unscrew the inlet pipe, and then under the tank, unscrew the lock nut or locknut to remove the ball valve.
3. Insert the new ball valve into the hole of the tank. After installing the gasket in the tank, tighten the lock nut outside the tank firmly so that the internal gasket is pressed tightly against the hole of the tank. But do not overtighten it.
4. If you are uncertain about it, look for customer service and find a repair center. This will certainly solve it.
Editor's summary: The above is about toto toilet water tank and toto toilet how to maintain a good introduction, if the toilet has a problem for our daily life is a great inconvenience, so it needs to be repaired in time, if it is a small problem If it leads to sewage, it will be serious, and it will even affect neighbors downstairs.
High Speed Steel Taps And Dies
Supal(changzhou)Precision Tools Co.,Ltd , https://www.endmillpro.com