VDW expects German machine tool demand to return to a lower level

On October 6, 2009, the European Machine Tool Show (EMO) was held in Milan, Italy. At this time, the German machine tool industry was suffering from the severe impact of the world financial and economic crisis. Martin Welcker, president of the German Machine Tool Manufacturers Association (VDW), said at the EMO, "In recent years, the German machine tool industry has maintained a prosperous development trend, but in the first half of 2009, all relevant statistical indicators have plummeted."
In the first half of 2009, German machine tool orders decreased by 67%, and both production and exports fell by one-fifth. The only bright spot is the export situation to China. In recent years, China has been the largest export market for German machine tools. In July, the capacity utilization rate of German machine tools has dropped to a record low of 65.9%. The number of machine tools also fell from the peak in October 2008 to 70,500 in the first half of 2009, a decrease of 3,000 in these months. VDW expects German machine tool production to fall by 40% in 2009.
Despite this, VDW believes that the current signs of improvement are multifaceted and the industry will gradually improve in 2010. This expectation is mainly due to the optimistic market in Asia and South America. Especially in China and India, the impact of investment is small, and economists expect the market in the region to be positive in 2010.
At EMO in Milan, the German machine tool industry showed its activities related to energy saving in the machine tool industry. The theme was “Blue Competitiveness – Active Focus on Energy and Environment”. “Blue competitiveness” reflects the sustainable development thinking of industrial production. On the whole, energy conservation involves not only individual machine tools, but also the power of customers and suppliers to jointly improve the energy efficiency of the entire process.

Stainless Steel Sliding Door

Characteristics and Advantages

(1) Intelligent control design: adjustable main parameter and secondary parameter automatically according to the weight of door leaves;

(2) Low noise: Special static sound track, integration of motor, worm-gear and retarder.

(3) Anti-clamping function: automatically reverse when meeting barriers;

(4) Unique electronic motor lock: the motor will lock up when the door is forced to open.(controlled by remote or switch)

(5) Tighten force: seal door when closed, power consumption approximately 10W under standby;

(6) Advanced brushless motor(36V,100W) can automatically adopt different heavy door leaves;

(7) Bi-doors inter-locking: one of the door leaves always remains closing;

(8)Safety sensor terminal: sensor stops working when door closed;

(9)Unique coating technology: never rusty;

(10)Easy and convenient to install;

(11)Working Process: when the door leaf closes to the right place, the door leaf will slightly shift to the door frame and the ground. The rubbers on the four sides of the door leaf will completely combine with door frame and ground, which ensures air tightness. When the door is open, the rubbers will separate from door frame and ground, which avoids contraction on the ground.

Technical Specification

Specification	Light Duty		Heavy Duty
Rang of the Door	Single-Leaf	Double-Leaf	Single-Leaf	Double-Leaf
Door leaf max weight	100kg	100kg x 2	200kg	200kg x 2
Mounting Method	Surface mounting or built-in mounting
Open Width	700-2000mm	650-2000mm	750-2000mm	650-2000mm
Power Supply	AC 220v ± 10%, 50-60 Hz
Opening Speed	300-500mm/s (adjustable)
Closing Speed	250-550mm/s (adjustable)
Creep speed	30-100mm/s (adjustable)
Hold-open time	0.5-20s (adjustable)
Airproof Force (Max.)	>70N
Manual Pushing Force	<100N
Electronic Lock Force	>800N
Power consumption	150W
Ambient temperature	-20+50 C

Technical Details:

(1) Rubber lining sealing technology combined with V groove on the guide rail enables the door completely sealed when the door closed;

(2)Special door body location technology. Semicircular surface beam on the ground matches with the V style groove at the bottom of door leaf, which stop the door from swing and make sure it moves stable and smooth;

(3) The door body decorated with matte stainless steel or spray surface, and on the middle and both sides with sealing stripes to ensure the hermetic effect.

(4)Feet sensor switch applied to avoid contagion;

Stainless Steel Sliding Door,Stainless Steel Bypass Sliding Door,Stainless Steel Interior Sliding Door,Stainless Steel Folding Sliding Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfhighspeeddoor.com