No new hardware is found after the video card is plugged in
The metal pins of the board may not be in contact with the PCI slot. You can remove the board and insert it again or use a rubber to wipe the metal foot and change to another PCI slot.
After the software is running, there is no image or abnormal image in the display frame . Check whether the video signal source is normal and whether the board connection cable is tight. It is recommended that the graphics chip be ATI9200 or more. It is required to install DirectX8.0 or higher, and the display is set to a resolution of 1024*. 768, color 32-bit true color; if there is screen distortion, you can remove the “Support Overlay Mode Preview†from the “Settings†→ “System Settings†→ “Other†item and restart the software to take effect.
The software failed to create the database for the first time
- Must ensure that the hard disk has at least three partitions, the software will not use C, D disk, only the partition from the E disk to create the database, the disk's file system must also be NTFS format.
The upper right corner minimize button is invalid
-- The "Lock System Key" function must be removed from the "Settings" → "System Settings" → "Other" options before it can be used.
Video file save, backup and play
- The database takes a preset space. After the partition is created, the partition is occupied and the files cannot be viewed in windws. If you want to back up the recording data, you can save it to other disk partitions in the playback interface. The player is in the Player folder in the installation directory.
Client and IE Cannot View Host Image
- First, make sure that the computer on the network is connected to the host. Check whether there are other applications on the host that occupy port 80. You can modify the network port in "Settings" → "Network Settings" → "Communication Parameters". IE access When you need to minimize the IE security level of the computer to allow the control to download normally, the XP system can not enter the IE security custom level to change the disabled items of the control to prompt or enable.
The metal pins of the board may not be in contact with the PCI slot. You can remove the board and insert it again or use a rubber to wipe the metal foot and change to another PCI slot.
After the software is running, there is no image or abnormal image in the display frame . Check whether the video signal source is normal and whether the board connection cable is tight. It is recommended that the graphics chip be ATI9200 or more. It is required to install DirectX8.0 or higher, and the display is set to a resolution of 1024*. 768, color 32-bit true color; if there is screen distortion, you can remove the “Support Overlay Mode Preview†from the “Settings†→ “System Settings†→ “Other†item and restart the software to take effect.
The software failed to create the database for the first time
- Must ensure that the hard disk has at least three partitions, the software will not use C, D disk, only the partition from the E disk to create the database, the disk's file system must also be NTFS format.
The upper right corner minimize button is invalid
-- The "Lock System Key" function must be removed from the "Settings" → "System Settings" → "Other" options before it can be used.
Video file save, backup and play
- The database takes a preset space. After the partition is created, the partition is occupied and the files cannot be viewed in windws. If you want to back up the recording data, you can save it to other disk partitions in the playback interface. The player is in the Player folder in the installation directory.
Client and IE Cannot View Host Image
- First, make sure that the computer on the network is connected to the host. Check whether there are other applications on the host that occupy port 80. You can modify the network port in "Settings" → "Network Settings" → "Communication Parameters". IE access When you need to minimize the IE security level of the computer to allow the control to download normally, the XP system can not enter the IE security custom level to change the disabled items of the control to prompt or enable.
Metal table lamp, the whole is mainly made of metal materials, suitable for bedroom, living room, office, study and other indoor places. Modern and simple design, diverse modeling, whether placed in the home or office, can be well integrated into the environment, suitable for decoration joker. Made of metal, it doesn't look bulky, and the overall line looks very smooth. In addition to playing the role of lighting, in the case of decorative space effect, whether the light is on, or off, is a work of art.
Golden Table Lamps,Big Metal Lamps,Black Metal Table Lamps,Brass Table Lamps
INSHINE LIGHTING CO.,LTD , https://www.inshinelight.com