Agricultural pumps energy-saving pumps oblique change mouth ring 9 ways

First, the pump ramp, reduce the elbow. Turn the pump ramp or volute, so that the outlet is facing the pool. Second, shorten the pipeline. Remove the 1 m pipe, 10 hours can save diesel 0.21 kg. Third, expand the water pipe diameter. The 4-meter-long 10-cm water hose replaced 15-cm tube, 10 hours can save diesel 0.5 kg. Fourth, in the water can be kept clean, you can remove the filter. Fifth, change the ring, adjust the axial gap. Prevent impeller ring and axial clearance is not appropriate, when used should be adjusted according to the pump's factory instructions. Sixth, promptly eliminate pipeline blockage. Foreign matter left in the inlet pipe, impeller or diversion channel, will reduce the amount of water. Seven, to prevent the pump inlet. Pump into the air, the amount of water will be significantly reduced, the sealing parts to deal with the inspection and maintenance. Eight, the use of direct coupling instead of flat belt coupling, can improve transmission efficiency. Nine, eliminate "anti-aircraft" type outlet. This outlet increases energy consumption.

ASTM A249 Stainless Steel Tubes

Stainless Steel Sanitary ASTM A249 Stainless Steel Tubes is the main tubing line for a piping system. Generally, ASTM A249 Stainless Steel Tubes are made in stainless steel 304 and 316l, but we provide other grade too such as hastelloy C22, 316Ti, Titanium and nickel alloy etc. Kaysen offer both sanitary seamless tubes and Sanitary Welded Tubes to ASTM A270, ASTM A249, A269, ASTM A554, DIN11850, and size is up to 12″. Inner and outer surface is polished to meet the high purity requirement of hygienic industries. Kaysen is ability to supplying qualified ASTM A249 Stainless Steel Tubes comply to your your condition and FDA,GMP requirement.

ASTM A249 Stainless Steel Tubes - Sanitary Tubing
Material: SS304, SS316L, EN 1.4301, EN 1.4404, etc
OD diameter: 1/2" - 12"
Thickness: 0.5mm - 6mm
Standard: ASTM, JIS, DIN, JIS, SUS, GB
Length: 6m or customer made
Tolerance: OD. ±0.2mm; Thickness: ±0.02mm; Length: ±0.5mm
Surface Treatment: Matt Finish or Mirror Finish (320# 400# 600#) etc
Application: Boiler, heat exchanger, construction, hygienic, pharmacy, power, petrochemical

Strength:
Heat Treatment of solution annealing for the sanitary tubings and fittings are available
High precision on dimension and wall thickness
Both seamless and welded sanitary tubings are available
Length is up to 12 meters.
Min. order quantity of sanitary tubings is from 300Kgs.
Offer industrial pipe and tubes according to order.
PMI test to verify material grade.
Visual and surface 100% examination before shipment.
End protected for shipment.

ASTM A249 Stainless Steel Tubes,A249 Stainless Steel Tubes,1.4404 Stainless Steel Tubes,Stainless Steel Sanitary Tubes

Kaysen Steel Industry Co., Ltd. , https://www.chinasanitaryvalve.com