Speaking of the maintenance of tile bathroom, especially the mold, the housewives must have a deep understanding. So mold prevention is a "prolonged war"! With these tips, you can beat mold spots and protect tiles!
Anti-seepage and anti-mildew basic measures
Since the walls of the bathroom are mostly made of ceramic tiles, in order to ensure long-term cleanliness and brilliance, a decontamination paste with multifunctional functions can be selected for daily maintenance. For the gap between the tiles, use a toothbrush to remove a little decontamination paste to remove it, then use a brush to brush a waterproofing agent to prevent seepage and mold.
Polished tiles should be waxed regularly, with a time interval of 2-3 months.
If there is a scratch on the brick surface, apply the toothpaste on the scratch and wipe it with a dry cloth to repair it.
Toilet: Solving the problem of tile gap mold mold paper is "contributor"
You can stain the toilet paper with bleach and stick it on the gap of the tile to let it stay for a while. After the mask is finished for the gap, the mold can be cleaned by rushing with water. It is also possible to use a bleaching detergent, apply it to the moldy area, wait about 30 minutes, then brush it with a brush or toothbrush.
From the gap between the brick and the brick, the decontamination paste can be used to remove the dirt from time to time, and then a layer of waterproofing agent is applied in the gap to prevent mold growth.
Bathroom: wet emergency treatment baking soda to wipe
If the tiles in the bathroom are found to be damp, they should be disposed of immediately. You can use a dehumidifier to agglomerate the baking soda that is usually used for moisture absorption. Dip some of the wet towel with a wringed dry towel to directly wipe the mold spots or stains on the wall.
Dilute the general bleaching agent for laundry (about 1:4 to 1:3 with water), and wipe it on the gap between the tiles to easily eliminate the annoying mold spots!
Kitchen: Candle coated wall, alternative, simple mold
At the tile joints behind the kitchen hob, stains are often difficult to clean. The gap between the bathroom wall tiles, usually the cement structure, when the moisture invades, it becomes dark because of mold. After cleaning the wall, a layer of wax can be applied to the cement between the cements. It can usually be maintained for a season without scraping it.
Gently apply the candle to the tile joints, firstly in the longitudinal direction, so that the candles can be evenly applied to the seams; then apply horizontally so that the thickness of the candle and the thickness of the tile are the same. Apply a candle to the seam to make the tile joints less susceptible to oil.
Lime moisture-absorbing bag: moisture-proof small object DIY
Usually we can also make a lime moisture pack in the bathroom to help the tiles to prevent moisture, but pay attention to the use of quicklime, not the construction of lime. Take some quicklime powder, wrap it in a medium-sized cotton cloth or cloth bag, sew the mouth, and hang the small cloth bag with a rope and hang it in a relatively humid place.
Galvanized Chain Link Fence,Hot Dipped Chain Link Fence,Chain Link Fencing,Galvanized Chain Link Fence Kit
Shenzhou City Hongda Hardware Products Co.,Ltd , https://www.galvanziedwire.com