How to improve the service life of the sprayer? Sprayer accessories how to choose? Henan Hao Li spraying machine manufacturers to introduce how to improve the service life of the spraying machine and commonly used spraying machine accessories selection method.
1. How to improve the service life of shotcrete 1. The operator of shotcreting machine should grasp the situation in time, understand the overall situation, make a reasonable and detailed plan for maintenance of the shotcreting machine equipment, and give instructions and supervision on maintenance operations and procurement activities.
2. It is necessary to strengthen the daily maintenance of the spraying equipment and prevent accidental protection and prevent leakage. Strengthen the daily inspection of the spraying equipment. The inspection results should be recorded in detail. Not only should the past maintenance records of the spraying machine be replaced, the records of the parts of the spraying machine replaced, but also the records of daily use and workload in order to analyze and Timely and accurately eliminate the hidden troubles of the spraying machine. This will ensure the safety of the sprayer during use.
3. The improvement of the service life of the shotcreting machine must first strengthen the professional and technical training of operators and strictly implement the safety operation procedures. Must adhere to the implementation of "two sets of three guarantees" system: fixed, fixed, package use, package storage, package maintenance. The target cost management is applied to the spraying equipment, linking the operator's economic benefits with the use of the spraying machine, and strengthening the professional moral education and training for operators.
4. A commonly overlooked issue that needs to be specifically addressed is the effect of environmental factors on the service life of the sprayer. Most of the equipment of the spraying machine is operated in a relatively harsh environment. The operating site often changes due to changes in geological conditions, so its performance is affected by the temperature, humidity, and geology of the work site.
Second, the commonly used sprayer accessories selection method 1, sprayer spray pipe selection method. Spray pipe is an important pipe for conveying slurry. Its quality will reduce the loss of slurry, and it is also an important accessory for improving work efficiency. During the selection, it should be asked whether the manufacturer is made of highly wear-resistant synthetic rubber and nano-materials, and observe the inside and outside layers of the spray pipe to see whether the steel wire reinforced layer and the corrosion-resistant outer rubber layer are used. If you are in compliance, you can rest assured that if you purchase the product through the Internet, you can consult the relevant manufacturers, wait until the goods are sent to check the relevant issues, if not, you can return, to avoid the use of can not be returned.
2, spray nozzle selection method. When choosing nozzles, high wear-resistant nozzles made of polyurethane material should be selected. Generally, the overall color is yellow transparent. Through the light, the outside of the nozzle can be observed to be clear and translucent, indicating that the texture is good, and the flexibility of the nozzle should also be taken care of. When questions are purchased, they should be made clear to the manufacturer before purchasing.
3, spraying machine steel liner selection method. Steel liners should pay attention to the sealability of the upper and lower platens during the selection. Due to the rapid wear during use, when selecting the steel liners, it is necessary to pay attention to whether the products are made of high manganese steel or stainless steel, because both materials are High wear resistance.
4, the selection of spraying machine cone sleeve. The taper sleeve is generally made of polyurethane material and has the characteristics of wear resistance, compression resistance, and not easy to break. When the taper sleeve is selected, it is lightly folded by hand to see if there is a small crack in the crease. If it appears, it indicates that the product The quality is off, and the wear resistance is not good. It is recommended not to purchase this type of product. When the high-quality taper sleeve is lightly folded by hand, the creases will not appear small slits, and the creases will gradually disappear after reverting and will not be deformed.
5, spraying machine rubber board selection method. Rubber sheet is a relatively strict product in the spraying machine accessories, so when choosing, we must pay attention to the quality of the sealing plate and product technology. Quality can be seen by careful observation, poor quality rubber sheet shows that there are pits, pits, naked eyes do not pay attention to observation is difficult to find, this low-quality rubber production of rubber sheet will lead to poor sealing effect, resulting in spray gun Decline in work efficiency and increase related costs.
The Leather Gloves are usually 10.5-16 inches long, and it is made of split cow leather. The back of the hand is usually made of canvas. The cuff can be made of Rubberized cuff or Pasted cuff.
Its main performance is wear-resisting, thermal insulation. It can be protected the hand from injury.
It is widely used in porters, mechanical workers, gardeners, welders and so on.
Leather Gloves
Leather Gloves,Strengthened Welding Gloves,Heat Resistant Gloves,Pig Leather Glove
Greateagle Safety Products Co., Ltd. , https://www.greateaglesafety.com