The anticorrosive wood plank road is processed with preservatives, and whether the antiseptics are harmful to the human body, it is relatively safe to choose what kind of preservatives are processed. These are probably consumers most concerned about. Anti-corrosion wood, of course, has anti-corrosion effects and is therefore more often used as a material for outdoor flooring. Anti-corrosion wood flooring can effectively prevent the erosion of microorganisms, and also prevent insect infestation. At the same time, it is waterproof and anti-corrosion, so it can withstand the harsh environment of the outdoors, and does not bother to take care of it. Then, the following Xiao Bian gave you talk about how the construction process of the wood plank road is done.
Wood plank road construction technology:
1. Construction preparation: Be familiar with the construction plans and relevant specifications and regulations before construction. According to the requirements of construction drawings, the materials, specifications, and quantities of various wood components are proposed and checked one by one.
2, common tools, tools: woodworking circular sawing machines, woodworking plane planers, hand saws, hand-planing, hammers and so on.
3, operating conditions: (1) the construction drawings and the summary of the review, the construction program is complete, and technical team to the construction team, and make a good record of all construction. (2) The materials, materials, specifications, and quantities classified according to the requirements of the construction drawings have been shipped to the site. (3) Provisional construction of water and electricity has been completed. (4) The basic project has been accepted and qualified.
4. Construction process of wood structure: Material preparation: wood component manufacturing, wood component assembly, wood component finishing
(1) Timber preparation: The wood species, material, specifications, and quantity must be consistent with the requirements of the construction drawings. Plates and wooden block materials are not allowed to have decay and insect infestation, cracks are not allowed on the connected sheared surface, discomfort on the wooden section is too concentrated, and live wood festivals are not allowed. The moisture content of logs or square wood should not exceed 25%, and the wood structure moisture content should not exceed 18%. Anti-corrosion, pest control, fire prevention treatment according to design requirements.
(2) Wood component processing and production: All kinds of wood structures are processed according to the requirements of the construction drawings, leaving sufficient allowance for different processing accuracy. Wood components after processing are timely checked for specifications and quantities, and are neatly stacked. For deformable hardwood, take anti-deformation measures when stacking.
(3) Wood component assembly:
A. The quality of structural components must meet the design requirements, and no damage or deformation occurs during stacking or transportation.
B. The support, support, connection and other components of the wooden structure must meet the requirements of the design requirements and the construction specifications. The connection must be firm and loose. C. The pedestal, beam and column bearing parts should be treated according to design requirements or construction specifications for preservation.
D. Garden accessories such as platforms, wooden trestles, and wooden bonsai should be treated for preservation according to design requirements or construction specifications. The connector should be stainless steel or galvanized iron.
(4) Wood finishing:
A. Remove burr and dirt from the wood and sand it with an emery cloth.
B. The bottom of putty, dry sand polished smooth.
C. According to design requirements primer, topcoat and layer by layer construction.
D. Mix paint is not allowed to peel, leak brush, anti-rust, bottom, falling, wrinkled skin.
E. varnish is not allowed peeling, leaking brush, stains, bottom, falling, wrinkled skin, shiny surface, smooth, straight lines.
F. Tung oil is applied with a clean cloth and then squeezed and squeezed onto a dry wood surface. Do not leak paint, peeling, wrinkling, spots, bottom, falling, smooth and smooth surface, straight lines.
G. The wooden platform is used for hot waxing and soft wax cleaning. The type and quality of wax used must meet the design requirements. It is forbidden to scald the floor and damage the board surface during construction.
Preservatives are the key
The advantages of anticorrosive wood plank road <preservation, anti-mite> As its name suggests, anti-corrosion wood certainly has the role of anti-corrosion, so it will be more used as outdoor flooring materials. Anti-corrosion wood flooring can effectively prevent the erosion of microorganisms, and also prevent insect infestation. At the same time, it is waterproof and anti-corrosion, so it can withstand the harsh environment of the outdoors, and does not bother to take care of it.
However, as an outdoor wood, its thermal expansion and contraction has not undergone special control, so the deformation is serious. In the laying of preservative wood flooring, it is usually necessary to make a floor with crevices, and a piece like an open one is framed and can be opened at will to facilitate cleaning or picking up fallen objects.
Anti-corrosion wood is one of the main uses of the wood plank road. In addition, the wood can also be used to make other outdoor products, such as tables and chairs, swings, trellises, and even wooden huts, just like our family abroad. It's common in the courtyard. Nowadays, there are more and more people living in the villas in the country. Setting some wood-preserved furniture in their own yard is also a kind of fun.
The price of wood-based furniture is not expensive, and it is about the same as that of general furniture. Although it looks rough, it is more in line with natural style.
The above points are the information on the construction process of the anticorrosive wood plank road used by the Xiaobian for everyone. I believe we will have a certain understanding after reading it. This way, everyone will know a lot, if you still have those who want to understand You can check it out on our website.
Wood preservative wood preservative decoration decoration company look good decoration materials brand decoration
used for stainless steel, iron sheet, angle steel, copper and aluminum, etc. It is also suitable for wood, plastic and other software materials.
FEATURE:
OPT premium HSS-PM drills are used to machining for cast iron, non-ferrous Features you should know
1.Designed to machine tool steel,alloy steel,mold steel,and other high hardened materials;
2.Suitable for aluminum,aluminum alloy,copper&non-ferrous materials;
3.Designed for HRC45-55 and HRC60;
4.Altin coating for high wear resistance;
5.High quality with reasonable price;
6.Rapid delivery;
7.Altin/sin/dlc coating and customized coating;
Flexible in order quantity:
Samples can be provided before mass production, and MOQ can be discussed accordingly.
PRODUCT DETAIL:
PRODUCTING PROGRESS:
PAYMENT AND DELIVERY:
PRODUCT EQUIPMENT :
ABOUT US :
We are specialize in manufacturing PCD diamond tools and Carbide tools. Our major product inclulde PCD Inserts , PCD Reamers , PCD End Mills, PCD Taps, Cabide Inserts,Carbide Drills, Carbide Reams, Taps etc.,
We also offered customized cutting tools per drawings, and provide package according to customer requirements. We manufacture a series range of cutting tools for machining of Cast iron, Aluminium alloy and Non-Ferros metal, it is widely used in all major sectors like Automobiles, Engineering, Aerospace, Aviation and 3C industry. Premium quality of raw material is used in the production and strict examination during processing with advanced equipment, so our client are satisfied with our reliable quality and on-time delivery.
Our best selling of cutting tools include PCD Inserts, PCD End Mill , PCD Ball Nose Mill, PCD Reamer , Carbide Taps, Carbide End Mill , Special Form Cutter and many more. For these years we have been made a large forward in the technologies of manufacturing cutting tools. With high quality on performance and price, our product sells well both on domestic and overseas market. And we will always focus on the quality and best service, to make long business relationship.
quanlity control:
We have dedicated team of quality control and precise equipment to keep good and stable performance for our products and processing services.
Premium HSS-PM Drills
High Speed Steel Bit,HSS Drill Bits,High Speed Drill Bits,Carbide HSS PM Drill
OPT Cutting Tools Co., Ltd. , https://www.optdiamondtools.com