The filament winding machine is the main equipment of the filament winding technology. The design and performance of the filament winding product are realized by a winding machine. According to the control form, the winding machine can be divided into mechanical winding machine, digital control winding machine, microcomputer control winding machine and computer numerical control winding machine. This is actually the four stages of winding machine development. At present, the most commonly used mechanical and computer numerical control winding machine. Filament winding machine is the main equipment of the filament winding process, which is usually composed of the fuselage, transmission system and control system. Auxiliary equipment includes dipping equipment, tension measurement and control system, creel, mandrel heater, pre-impregnated yarn heater and curing equipment, etc.
The auger bit adds a long deep spiral flute for effective chip removal.
Two styles of auger bit are commonly used in hand braces: the Jennings or Jennings-pattern bit has a self-feeding screw tip, two spurs and two radial cutting edges. This bit has a double flute starting from the cutting edges, and extending several inches up the shank of the bit, for waste removal.
The Irwin or solid-center auger bit is similar, the only difference being that one of the cutting edges has only a "vestigal flute" supporting it, which extends only about 1â„2 in (13 mm) up the shank before ending.
The diameter of auger bits for hand braces is commonly expressed by a single number, indicating the size in 16ths of an inch. For example, #4 is 4/16 or 1/4 in (6 mm), #6 is 6/16 or 3/8 in (9 mm), #9 is 9/16 in (14 mm), and #16 is 16/16 or 1 in (25 mm). Sets commonly consist of #4-16 or #4-10 bits.
Extra Long Auger Bit,Auger Drill Bit,Drill Bit With Flute,Carbon Steel Wood Working
Behappy Crafts (suzhou)Co.,Ltd , https://www.behappyindustry.com