Home>Bearing knowledge> SKF transmission bearing disassembly method and precautions

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

SKF transmission bearing disassembly method and precautions

Source: Bearing network time: 2014-07-12

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The spindle-guided SKF bearing of the transmission is embedded in the end of the crankshaft; due to the poor working environment; it is rusty. It is not a very simple matter to remove the SKF bearing. The usual imported bearing disassembler can not be sent. This is because the imported bearing disassembler relies on two or three small claws to hook the bearing shell to disassemble the bearing; the main shaft bearing is inside the crankshaft; it cannot be fixed and then disassembled. Normally; the repairman Small iron rods are often used for bearings; however, as long as the force is slightly wrong, the SKF bearings will be damaged; thus the damaged SKF bearings are difficult to remove; the following analysis is a simple method; the most common cotton and Butter easily removes the SKF imported bearing transmission bearing.
Cotton and butter are the most common things in repair shops. In repairs; many people use cotton silk just to wipe their hands; butter is used to smooth.
If the cotton and butter are combined, the SKF bearing of the transmission main shaft is disassembled; the specific operation is very simple: insert a large mass of butter into the inner sleeve of the SKF bearing; then plug the buttered cotton yarn into the SKF imported bearing. In the inner sleeve; until the plug does not enter the cotton thread to stop. Then use an iron rod to hit the iron rod with the hoe in the axial direction. When the cotton thread is smashed down; then the cotton thread is inserted into the SKF bearing; SKF imported bearings will be squeezed out.
This method is applicable to any bearing with guide bearings. When disassembling the SKF imported bearing transmission main shaft guide bearing; experiment with this method; the effect is very good. Usually the entire disassembly process can be completed in 10 minutes; and the SKF bearing has no damage.

Recommend to friends comments close window

Bearing related knowledge

The scraper of the cone crusher thrust bearing and the device used to classify the adjustable bearing clearance ball bearing
SKF bearing application conditions and environmental conditions

This article links to http://
Please indicate China Bearing Network http://

Previous: Some tips for handling bearings Next: SKF imported bearing problems

Mesh Panel

Mesh Panel

Mesh panel with smooth surface and firm structure is made of high-quality low carbon steel, stainless steel and aluminum alloy steel. Its surface treatment includes PVC coated, PVC praying, hot-dipped galvanized and electric galvanized. The PVC coated and galvanized surfaces have good corrosion resistance and weather resistance, so it can provide a long service life. The common size of panel usually is 1800 mm Ã— 3000 mm, we also accept other sizes for customers' needs.

Mesh Panel,Black Wire Mesh Panel,Galvanized Wire Mesh Panel,Reinforcing Welded Mesh Panel

HENGSHUI YUZHENG IMPORT AND EXPORT CO., LTD. , https://www.yuzhengnails.com