In life, many people do not know how to identify the good and bad LED energy-saving lamps, which brings some misunderstandings to the selection of LED energy-saving lamps, and now there are mainly "five look".
A look at packaging and trademarks
The state mandates that LED lamp manufacturers produce the following contents on the outer packaging: rated voltage, voltage range, rated power, and rated frequency.
Generally speaking, the quality of the trademark printing of high-quality products is good, the font is clear, it is not easy to fall off, and it is wiped with a soft damp cloth. The mark is clear and identifiable, it is not easy to wipe off, and there are trademarks of manufacturers and related certification marks. Counterfeit products have poor printing quality, fuzzy fonts, easy to erase, no manufacturer's trademark and related certification marks.
Second, look at the appearance of LED tubes
The real LED energy-saving lamp is a three-color tube, which is white, covered with a hand and whiter. In addition, from the perspective of the lamp, it is possible to compare a plurality of lamps together. The shape and size consistency of the lamp tube is much better than that of the OFweek semiconductor lighting network, and the machine is bent and formed, and most of them are mass-produced products. The consistency of the product is good, the quality is easy to be guaranteed, and the interchangeability during maintenance is better. Of course, there should be no cracks, looseness, and traces between the interfaces. During the installation and disassembly process, the lamp cap should not be loose or smashed. The plastic shell of the lamp must be selected from the flame retardant type of engineering plastic. Ordinary plastics are easily deformed and flammable, and are prohibited from being used in the production of energy-saving lamps. The two can be easily discriminated from the surface. The latter surface is smooth and shiny, and the surface of the former has a texture similar to frosted glass.
Third, look at the temperature at work
When the LED energy-saving lamp is in normal working condition, its temperature rise should be very low. Otherwise, the LED energy saving lamp has a very short life. At the same time, when the energy-saving lamp is lit, there is a rapid flashing, or it is very glaring, indicating that the energy-saving lamp has quality problems.
Four to see the startup performance
LED energy-saving lamp startup has two characteristics: First, the higher the temperature, the easier it is to start; the second is that the lamp is turned off and will not flash. In addition, it is worth mentioning that many LED energy-saving lamps are very dark, which is not good for the life of the bulb. The LED energy-saving lamps should have a power circuit and a PCB board inside.
Five to see the interference situation
In China, electromagnetic compatibility is a project that must be passed by electrical appliances. However, the detection of this project is very complicated. When users buy lamps, they will see if they pass the packaging.
The national electromagnetic compatibility test mark, the second is to bring a medium and short wave radio, when the light works, put the radio nearby, the lower the noise emitted by the short-wave radio station, the better the electromagnetic compatibility of the measured light .
Fire Elevator,Fireman Elevator,Fireproof Elevator,Fire Service Elevator
Homefriend&FUJI Elevator Co.,Ltd , https://www.jfujilift.com