The most professional inverter repair center, especially good at drive board maintenance, switching power supply repair, elevator circuit board repair, PLC circuit board repair, touch screen circuit board repair and various industrial equipment maintenance inverter heat sink overheating oh1 is also a comparison Common faults, main reasons: check and check whether the inverter control terminals (13, 12, 11) are short-circuited; check whether the temperature sensor detection circuit is normal; also check whether the cooling fan of the inverter is running normally; Whether the heat sink is clogged; the ambient temperature is too high.
Example analysis: A Fuji frn15g11—4cx inverter, power-on display heat sink overheating (oh1). Analysis and maintenance: Because the inverter is newly installed, there is a fault after power transmission, so the possibility of the inverter being bad is not great; the heat sink is not blocked; the cooling fan is running normally. After the power is cut off, test the analog input circuit with a multimeter and check the short circuit between the inverter control terminals (13, 12, 11). The reason is that the external frequency setting of the analog input circuit sets the "potentiometer" resistance value too small. Replace it with wxwxx0.25-1, 0.25w 47~4.7k potentiometer. After power-on, the inverter runs well and there is no such fault during operation. Shanxi Taiyuan inverter repair http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Example analysis: A Fuji frn15g11—4cx inverter, power-on display heat sink overheating (oh1). Analysis and maintenance: Because the inverter is newly installed, there is a fault after power transmission, so the possibility of the inverter being bad is not great; the heat sink is not blocked; the cooling fan is running normally. After the power is cut off, test the analog input circuit with a multimeter and check the short circuit between the inverter control terminals (13, 12, 11). The reason is that the external frequency setting of the analog input circuit sets the "potentiometer" resistance value too small. Replace it with wxwxx0.25-1, 0.25w 47~4.7k potentiometer. After power-on, the inverter runs well and there is no such fault during operation. Shanxi Taiyuan inverter repair http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Grow Light For Indoor Plants 220w
Grow Light For Indoor Plants 220w, quantum board Plant Lamp 220w with 2 board, each board 350pcs led, include 3500k white+660nm red+UV+IR, samsung LM301B/LM301H quantum board with meanwell driver, meanwell driver we provide 5 yrs warranty time, normal driver 1 yr warranty.
Application:Grow Tent , indoor plants, hydroponic etc.
Best Lights For Indoor Growing,Led Grow Lights For Indoor Plants,Indoor Garden Light,Best Led Grow Lights For Indoor Plants
Shenzhen Wenyi Lighting Technology Co., Ltd , https://www.szwygrow.com