Pneumatic tool maintenance six tips and methods

The so-called pneumatic tool is a tool that uses the compressed air to drive the air motor and outputs the kinetic energy to the external work. It is a type of hardware product that is often used in the modern construction and machinery industries. With pneumatic tools, it will give people working in related industries work belts. Convenient, but the use of pneumatic tools and methods also require attention, how to use and maintain pneumatic tools? See how Xiao Bian can help you!

Use and maintain pneumatic tools methods and techniques:

1, to ensure the correct generation of gas supply system: inlet pressure at the tool entrance (non-air compressor outlet pressure) is generally 90PSIG (6.2Kg/cm^2), too high, too low are detrimental to the performance of the tool and life. The air intake must contain sufficient lubricant so that the air motor in the tool is fully lubricated (place a white paper on the tool exhaust to see if it is oily, normally it is oily). The intake air must not contain moisture, and it is not appropriate if the air is not air-dried.

2. It is not allowed to dismantle the parts of the tool and operate it afterwards, except that it will affect the safety of the operator and cause damage to the tool.

3, if the tool is slightly faulty or can not reach the original function through use, can not continue to use, to check immediately.

4, using all kinds of tools, be sure to follow the various safety regulations and instructions for operation.

5, to use the appropriate tools to work, the tool is too large to cause work injuries, the tool is too small to cause damage to the tool.

6, regular (about once a week) inspection, maintenance tools, add butter in the bearing and other rotating parts, add oil to the air motor parts.

Of course, in order to ensure that pneumatic tools will not be damaged during use, Xiao Bian suggested that if they do not operate pneumatic tools at all, it is better to find professional personnel for construction and use, and do not operate it by yourself.