The causes of the obstacles of the Yuntai and what are the treatments

Yuntai plays a decisive role in today's work, so it is inevitable that there will be obstacles in the future, what are the reasons for the obstacles and what are the treatments?

There may be the following aspects of the failure of the cloud platform

1. Unable to control the gimbal.

2. Unable to control the decoder.

3. Some features are not possible.

4. The signal indicator of the code converter does not work.

Unable to control the gimbal

1. Check if the sixth item above is normal.

2. Whether the output voltage of the decoder's 24v or 220v power supply port is normal.

3. Directly supply power to the up, down, and ptcom lines of the PTZ, and check if the PTZ can work normally.

4. Check if the power supply interface is connected incorrectly.

5. Check if the circuit is connected incorrectly (the old decoder is up, down, etc. and ptcom directly supplies power to the PTZ. Each line can be directly connected to the camera and PTZ lines; some decoders are independent.

Vertical power supply interface.

Some functions of the PTZ control cannot be used.

1. Follow the steps above to check the code turn.

2. Install the appropriate PTZ control patch.

3. Inform the supplier to check whether the uncontrollable function part is wired correctly, whether the PTZ, lens and other equipment are intact, whether the decoder function port voltage and the switch output are normal.