There are a large number of solid wood floors in the market covered with a large building materials market, which looks good at first glance. Light can tell people, different wood, then how to distinguish between high school and low in so many solid wood floors? What misunderstandings are easy to fall into when choosing solid wood flooring?
First, tree species wood floor
There are many types of trees that can produce floorboards. There are precious rosewood and teak wood; in general, there are eucalyptus wood, eucalyptus wood, manchurian ash, and gancrop. There are inexpensive pines and pines, and the price difference is very large. Misleading tree species names on the market are very common. Consumers can check the commonly used wooden flooring business name issued by the China Forest Products Industry Association Flooring Committee, or select their favorite tree species, texture, and color. Select the dyeing board, try to select the stable species of wood to avoid scooping, twisting, bending, cracking, arching and ringing during the long-term use of the wood floor.
Second, choose the size
The solid wood floors currently available on the market are all long and wide in size, such as 900 mm x 90 mm x 18 mm. In fact, the wooden floor should not be short and should not be narrow, should choose less than 600 mm × 75 mm × 18 mm floor, the smaller the size, the stronger the ability to resist deformation. If you like the long, you can use the ground plate, up to 4000 mm, like the wide optional integrated floor, up to 220 mm: the width of the floor should have anti-deformation groove, the groove depth should be more than one third of the floor thickness . If used for floor heating floor, should not be thick, generally 8 mm-12 mm.
Third, choose the moisture content wooden floor
The moisture content is crucial. The moisture content of the purchased floor must be consistent with the local equilibrium moisture content. Buy the floor must determine the moisture content, if the seller does not have moisture meter, do not buy its board. The method of measuring the equilibrium moisture content is very simple. In the exhibition hall, the moisture content of the purchased varieties is first determined, and then the moisture content of the wooden floor of the purchased varieties is checked out. If the moisture content of the two varieties is only 1%-2%, it is a qualified product.
Fourth, the selection processing accuracy
With 10 floors assembled on the ground, hand touch, seeing the accuracy of its processing, finish is smooth, smooth, rake, slot fit, installation gaps, anti-deformation tanks and other assembly is tight.
Fifth, choose the quality of the substrate
Check the level of the floor, whether there are bugs such as insect eyes, cracks, decay, blue changes, dead knots, etc. For small living quarters, color difference can not be too demanding, this is a natural property of wood, as for the natural texture of wood, most of the chord section, a small part of the cut surface, if you want to have the same cut, it is more difficult to achieve in solid wood flooring Unless it is a veneer veneer.
Six, choose paint quality
Dripping paint, roller paint floor, commonly known as paint board. Regardless of whether it is a light or matt lacquer floor, the paint film on the surface of the lacquer board should be uniform, full, clean, blistering, and perforated. Among them, the need to put forward is the degree of wear, it is recommended to buy UV light-curable paint, the market dealer referred to as UV paint board, its wear resistance, scalding and other properties are better than other finishing processes. Burning with a cigarette for 20 seconds does not leave a mark.
Mistakes in the selection of solid wood flooring
Misunderstanding 1: Think that the most expensive is the best.
Myth #2: Seek no color difference, and ask for no time.
Misunderstanding 3: Think that solid wood flooring is better than parquet.
special reminder:
1. Do not be confused by the sample in the store.
2. The floor delivered should be optimistic about the lot number on the package.
3. Be sure to invoice.
Solid wood flooring to buy
The Jigsaw is the wood working power tools, Perfect for cutting curve, hole digging,can cut 3cm circle.
Quick Clamp Chuck Portable Jig Saws With Laser is used for Cutting Wood, Plastic Tube, Aluminum Bar, with 6 speed 0-3000rpm, 4 Pendulum Settings, Bevel Cutting 45°, 20mm Stroke Distance, With Aluminum Base, and Laser Function.
No burrs with good blade.
Portable Jigsaw With variable speed, 0-3000rpm, for different material cutting.
The Jigsaw can cutting Capacity: Wood:80mm, steel:10mm
The Jig Saw with 4 Pendulum, 0 setting for metal, 1 setting for wood, 2-3 setting for soft wood.
Normal clamp chuck or quick clamping chuck is optional.
Iron base or Aluminum base is optional
Hand Jig Saw with a counterbalanced low-vibration plunge mechanism
Power Saw With a dust blower for max cut-line visibility.
Wood Cutting Power Tools with protection button for your safety, soft rubber handle for comfortable use.
The external laser function for better cutting line ability.
The Jig Saw is equipped with Guide ruler, to control the cutting width.
CE/GS/EMC/UKCA certificate.
Jig Saw,Cordless Jig Saw,Power Jig Saw,Power Jigsaw,Portable Jig Saw
Ningbo Brace Power Tools Co., Ltd , https://www.bracepowertools.com